Undercoat/Por 15
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: May 2009
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Undercoat/Por 15
Well, I pulled up a little bit of the carpet in this inside and found a puddle of water. Well I figured I might as well do a little mini project in the next couple of days. I am going to take out the carpet in the inside/trunk and clean the metal with a degreaser (simple green) then let it dry completely before I apply the Por 15. While the carpet is out I want to either dye it black or clean it with folex. I am going to apply undercoat to the wheel walls as well. I am going to take a pictures of this whole process and let you know the results after a few days. I am going to do this project in three phases...
Wednesday (Trunk)
Friday (Inside)
Saturday (Wheel Walls)
Parts/Products:
. Por 15
. Undercoat
. Roller
. Sandpaper (What grit would you recommend)
. Masks
. Masking tape
. Towels
. Simple Green
. Gloves
If anyone has done this project before and has any recommendations or tips I am all ears
Wednesday (Trunk)
Friday (Inside)
Saturday (Wheel Walls)
Parts/Products:
. Por 15
. Undercoat
. Roller
. Sandpaper (What grit would you recommend)
. Masks
. Masking tape
. Towels
. Simple Green
. Gloves
If anyone has done this project before and has any recommendations or tips I am all ears
Thread
Thread Starter
Forum
Replies
Last Post