DP for the Bonnie
#1
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Jul 2006
Location: Meridian, ID
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts
DP for the Bonnie
Any thoughts on how much a down pipe would help the performance of a Bonnie. We don't have the same issues as the GP with the U-bend so I am pondering the increase in a cost/benifit analysis for a DP.
#2
http://hoganperformance.com/DP8S.htm
409 Stainless Steel $ 139.95
This downpipe was developed to increase exhaust flow in the most restrictive area of the exhaust on the 97-03 Bonneville with a 3.8 SC and 3800 NA engine.
This pipe was installed on one of our clients cars recently. Dyno pulls were performed before and after the install with a 10-11 H.P. increase. The Dyno Sheet shows 2 pulls blue and red before and 2 pulls green and purple after.
Key Benefits
409 Stainless Steel mandrel bent tubing
Stainless steel flex coupler
Custom Cut 3/8 inch thick steel flanges
True bolt on with simple hand tools
This downpipe was developed to increase exhaust flow in the most restrictive area of the exhaust on the 97-03 Bonneville with a 3.8 SC and 3800 NA engine.
This pipe was installed on one of our clients cars recently. Dyno pulls were performed before and after the install with a 10-11 H.P. increase. The Dyno Sheet shows 2 pulls blue and red before and 2 pulls green and purple after.
Key Benefits
409 Stainless Steel mandrel bent tubing
Stainless steel flex coupler
Custom Cut 3/8 inch thick steel flanges
True bolt on with simple hand tools
#4
Senior Member
Posts like a Turbo
Originally Posted by willwren
I love that they did two pulls for each. Smart guys over there.
#6
Senior Member
True Car Nut
Join Date: Dec 2002
Location: Sauk Centre, MN
Posts: 5,459
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dillcc
I'm kind of confused... I thought you'd be putting down a lot more power at the wheels than that (243). :? Isn't 190-5 stock?
Those #'* are about what I'd like to see with my car as it will be next weekend.
#7
Senior Member
Posts like a Turbo
Originally Posted by dillcc
I'm kind of confused... I thought you'd be putting down a lot more power at the wheels than that (243). :? Isn't 190-5 stock?
Thread
Thread Starter
Forum
Replies
Last Post
red bonnie
Your Ride: GM Pictures & Videos
1
05-05-2008 10:19 PM
Mr Bean
General GM Chat
5
11-22-2002 03:21 PM