In the works ;)
02-18-2005, 05:16 PM
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
In the works ;)
Cam (and supporting parts including new valvesprings)
Water pump
New timing gears/chain
Stripped and cleaned EGR valve (done)
****censored*** (in process)
Ported TB (done)
Rebuild SC entirely (in process)
All new gaskets
Trans
Shooting for the 13'*
Water pump
New timing gears/chain
Stripped and cleaned EGR valve (done)
****censored*** (in process)
Ported TB (done)
Rebuild SC entirely (in process)
All new gaskets
Trans
Shooting for the 13'*
IC is what I am thinking, otherwise 13'* might be too optimistic. WIll, don't censor stuff, you know we will discuss it to death.
02-18-2005, 07:35 PM
#7
Senior Member
True Car Nut
Join Date: Sep 2004
Location: Farmington, Minnesota =MWBF '05 SURVIVOR= =CEBF '06 SURVIVOR= =August '06 COTM=
Posts: 9,130
Likes: 0
Received 0 Likes
on
0 Posts
Re: In the works ;)
Originally Posted by willwren
****censored*** (in process)
Hahaha nice......PM when you're on next...gotta a ?
02-18-2005, 08:35 PM
#8
Senior Member
Posts like a Corvette
Join Date: Jul 2004
Location: Bolingbrook, IL Location: Clarkston, MI
Posts: 1,256
Likes: 0
Received 0 Likes
on
0 Posts
Maybe separate cooling for the M62 case and TB? This year there is going to be some good compition between the S1 L67 guys.
02-18-2005, 10:20 PM
#9
Junior Member
Posts like a Ricer Type-R
Thread Starter
John, when DrJay pulled his original valvesprings, they were weakened to about 70# each from 100. You'd do well to replace them with at least 100# oem'*, or perhaps 105'*.
