solid mounts
#12
-- SITE DONATOR --
True Car Nut
Here it is. Keep the engine in its place. With the car in park, rocking it back and forth barely moves the engine compared to how it was with the bad engine mount.
#15
-- SITE DONATOR --
True Car Nut
It is noticeable compared to the factory motor mount, but not any more than what I expected.
Sitting at a stop light is not when I notice it, it'* when taking off you can feel the exhaust. It'* a good feeling.
Sitting at a stop light is not when I notice it, it'* when taking off you can feel the exhaust. It'* a good feeling.
#17
-- SITE DONATOR --
True Car Nut
If that is the way you want to go, you could do that. Most of the vibration probably comes from it'* inability to rock back and forth though. If you ever are in the area stop by and I'll take you for a ride, then you can make up your mind.
#18
Senior Member
Posts like a Turbo
Join Date: Feb 2007
Location: Columbus, Ohio
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
how do i know if i need new mounts? i have a2002 bonneville. I replaced the front tranny mount. How do I know if i need to replace the others?
#20
Senior Member
Posts like a Supercharger
Join Date: Feb 2009
Location: Chicago, IL
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
I may take you up on that.
I was just thinking under accel its basically motor through bolt into frame with no isolation.
Maybe a few rubber disks in between may make your setup perfect !!!
I was just thinking under accel its basically motor through bolt into frame with no isolation.
Maybe a few rubber disks in between may make your setup perfect !!!