P&P intake
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Jan 2002
Location: East Lansing, MI
Posts: 294
Likes: 0
Received 0 Likes
on
0 Posts
P&P intake
Okay, I have my intake completely gutted. throttlebody/alternator/upper and lower intake manifolds are removed
Now I just need my neighbor to come thru and let me borrow his dad'* dremel so i can polish this **** up... if by chance he doesn't, I need to get my car back together ASAP because I have to drive to my parents on friday. I will borrow my dad'* dremel then if my neighbor screws up. This has been one helluva project. DIRTY DIRTY DIRTY!
Lee
sorry no pics, I will have pics when i polish
Now I just need my neighbor to come thru and let me borrow his dad'* dremel so i can polish this **** up... if by chance he doesn't, I need to get my car back together ASAP because I have to drive to my parents on friday. I will borrow my dad'* dremel then if my neighbor screws up. This has been one helluva project. DIRTY DIRTY DIRTY!
Lee
sorry no pics, I will have pics when i polish
#2
Senior Member
Posts like a Camaro
Just polishing? Why not some porting also? But the polishing should help you pick up like 5hp. I ran my car at the track today (Wednesday), I need to figure out the numbers but it didnt do too well since it was hot air w/ a headwind and a 3000ft elevation... ugh.
#3
Senior Member
True Car Nut
Join Date: May 2002
Location: Edmonton, AB Canada
Posts: 2,621
Likes: 0
Received 0 Likes
on
0 Posts
Remember what I said on IRC about the exhaust next time! You might have to drill that broken stud out now (get lots of bits) and a small propane torch couldn't hurt either. :?
Thread
Thread Starter
Forum
Replies
Last Post