Performance question
#1
Senior Member
Certified GM nut
Thread Starter
Join Date: Jun 2004
Location: Grand Haven, Michigan
Posts: 1,719
Likes: 0
Received 0 Likes
on
0 Posts
Performance question
Alright, so, I am at a fork in the road. I am trying to decide if I want to get a new muffler and put that on, or a smaller supercharger pulley and put that on. I just don't know what to do. What should I do first. I am leaning a little towards the exhaust and then getting the puller after. How much would it cost to have a Flowmaster 80 series installed at a shop without tips? I'm just looking for a rough estimate.
#2
Senior Member
True Car Nut
Join Date: Dec 2002
Location: Sauk Centre, MN
Posts: 5,459
Likes: 0
Received 0 Likes
on
0 Posts
Get the Flowmaster from Jegs I believe for $80 + shipping, and take it around to different exhaust shops and get estimates. I'd think you should be able to get that muffler and have it installed, all for under $130.
Personally I prefer Magnaflow'*, but variety is the spice of life.
Also, you might find you'd benefit greatly from a www.justmagnaflow.com high flow catalytic convertor.
I'd wait for pulley because with the free'er flowin exhaust you'll have more gains from the pulley.
Personally I prefer Magnaflow'*, but variety is the spice of life.
Also, you might find you'd benefit greatly from a www.justmagnaflow.com high flow catalytic convertor.
I'd wait for pulley because with the free'er flowin exhaust you'll have more gains from the pulley.
#3
Senior Member
True Car Nut
Join Date: Jan 2003
Location: Bonney Lake/Ellensburg, Washington- WCBF '04, '05, '06, '07 Survivor-
Posts: 7,099
Likes: 0
Received 0 Likes
on
0 Posts
Like olblueeyes said, but the muffler from Jegs first. Then find a quality ma and pa place to get it installed. I paid $100 for installation of the muffler and tips that i had also bought.
Here'* the link for the muffler on Jegs:
http://www.jegs.com/cgi-bin/ncommerc...08&prmenbr=361
It'* the $79.99 one.
Here'* the link for the muffler on Jegs:
http://www.jegs.com/cgi-bin/ncommerc...08&prmenbr=361
It'* the $79.99 one.
#5
Senior Member
Certified GM nut
Thread Starter
Join Date: Jun 2004
Location: Grand Haven, Michigan
Posts: 1,719
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by willwren
Magnaflow, bud. Magnaflow. It flows better and produces more hp.
After the intake and exhaust are done, slap in a 180° thermostat, and get the pulley.
After the intake and exhaust are done, slap in a 180° thermostat, and get the pulley.
Thread
Thread Starter
Forum
Replies
Last Post
radomirthegreat
Performance, Brainstorming & Tuning
11
06-15-2007 02:57 AM
Vaughan221
Performance, Brainstorming & Tuning
3
08-18-2004 10:03 AM
Neocon
Performance, Brainstorming & Tuning
17
03-07-2004 03:36 AM