1998 custom burn at ZZP
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Aug 2002
Location: Funky Town, Texas
Posts: 333
Likes: 0
Received 0 Likes
on
0 Posts
1998 custom burn at ZZP
Just e-mailed Zoomer at ZZPerformance. He said I can get my PCM custom burned with:
1.Two minute fan turn on after the car shuts down.
2.Raised shift points.
3.Increased tranny line pressure.
4.possible perferd shift?
5.Raised speed limiter.
My car is a 1998 Bonneville SE 3.8 series II engine. Vin#"K".
The price they quoted me was $300 dollars U.*.
I am going to do it.
1.Two minute fan turn on after the car shuts down.
2.Raised shift points.
3.Increased tranny line pressure.
4.possible perferd shift?
5.Raised speed limiter.
My car is a 1998 Bonneville SE 3.8 series II engine. Vin#"K".
The price they quoted me was $300 dollars U.*.
I am going to do it.
#5
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Aug 2002
Location: Funky Town, Texas
Posts: 333
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Twister97
Which number will give you the best performance gain, or did they say anything about some extra juice with this chip?
#6
We'll be covering all 1997 through 2003 Bonnevilles by the end of June. 2000 and 2002 is already supported. Our current PCM price is $169.99 plus core plus shipping.
Please email ScottC@INTENSE-Racing.com for more information.
Scott
Please email ScottC@INTENSE-Racing.com for more information.
Scott
#10
Senior Member
True Car Nut
Join Date: May 2003
Location: Holt, MI & Lima, OH
Posts: 3,022
Likes: 0
Received 0 Likes
on
0 Posts
The guy at ZZP that is doing the PCM'* I'm pretty sure is Dave Buckshaw, which is one fo the DHP programmers. He has a '96 SSEi that is his daily driver so he has had a little time to tweak the PCM a little and he has come up with a GREAT code for it, and I'm pretty sure he said that it is basically exactly the same for at least the 96-99'*, maybe even the 2000+.
Shawn
Shawn