Muffler and Tips
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Sep 2002
Posts: 8,910
Likes: 0
Received 0 Likes
on
0 Posts
Muffler and Tips
I want to put a muffler and tips on my car. Will I lose low-end torque doing that? And what brand should I go with so I can get a nice rumbly sound, and not a high ricey sound?
#2
Senior Member
Certified GM nut
Join Date: Apr 2003
Location: Davison,Michigan
Posts: 1,867
Likes: 0
Received 0 Likes
on
0 Posts
Flowmaster 80 series is god on the 3800 I just love it go with it you will too . And you should put a high flow cat on there to while your at it. Gah your going to be going crazy?!
#4
Senior Member
True Car Nut
Join Date: Jan 2003
Location: Bloomington-Normal, IL 1997 SE
Posts: 3,734
Likes: 0
Received 0 Likes
on
0 Posts
there was a post with a link to a site that had clips on it...check a page or two back, I dont rememer what it was called but the site was good.
#6
Junior Member
Posts like a Ricer Type-R
You won't lose or gain torqe....you'll lose if you open the pipe diameter too much, but you won't lose or gain by changing the muffler. You WILL gain horsepower.
#8
Senior Member
Expert Gearhead
I got a nice HP kick with the Magnaflow and the high flow cat. My tip is custom too...hee hee, HP boost is right, and sounds great!!
Sol...the bone stock 95 is gradually changing huh?
Sol...the bone stock 95 is gradually changing huh?
#10
Senior Member
Posts like a Turbo
Join Date: Apr 2003
Location: Central Maryland
Posts: 463
Likes: 0
Received 0 Likes
on
0 Posts
If you want to hear what it sounds like and see pics, go to my link on cardomain. I love the new flowmaster 80 sound.
Where it says 'listen hear!' just cut the url and paste it into your broswer... its short but to the point, it was 9:30 at night and it was my wife trying to rev the engine.
Where it says 'listen hear!' just cut the url and paste it into your broswer... its short but to the point, it was 9:30 at night and it was my wife trying to rev the engine.