custom air intake/air filter/93SE
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Sep 2003
Location: Belleville, IL
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
custom air intake/air filter/93SE
I want to install a custom air intake and a cone filter on an 93 SE. I am mechanically minded, but not to the point where I can make my own parts. Are there any custom built kits? If so, where can I get one?
My apologies if this has already been asked, but this info is hard to find.
Many thanks.
-Aaron
My apologies if this has already been asked, but this info is hard to find.
Many thanks.
-Aaron
#2
Senior Member
Certified Car Nut
Join Date: Jul 2003
Location: Robbinsdale, MN
Posts: 15,408
Likes: 0
Received 0 Likes
on
0 Posts
Probably not going to be a lot of pre-fab custom parts for your car. The Bonne'* seem to be considered "Mon-modifiable" by the industry. Thier target audience, for starters, is an older crowd for the Bonne.
But, if you get ahold of Deathrat, he may have a thing or two for ya (to buy, he is a vendor after all)
{EDIT: He fixed his, I'll fix mine}
But, if you get ahold of Deathrat, he may have a thing or two for ya (to buy, he is a vendor after all)
{EDIT: He fixed his, I'll fix mine}
#7
Senior Member
Certified Car Nut
I have a 93 just like yours!
Honda pipes should fit.... 3" diameter is what you want too.
Here'* what i'm working with right now. I'm just waiting for a filter to arrive.
Honda pipes should fit.... 3" diameter is what you want too.
Here'* what i'm working with right now. I'm just waiting for a filter to arrive.
#8
Junior Member
Posts like a Ricer Type-R
Is that a wrinkle in the bend? Ideally, you want a more gradual bend than that. I think it'* time for some ADTR closeups.
Jason, you MIGHT have to open the IAT hole in the 4750 a bit. I've never test fitted mine in there, but it will be moving soon.
Jason, you MIGHT have to open the IAT hole in the 4750 a bit. I've never test fitted mine in there, but it will be moving soon.
#9
Senior Member
Certified Car Nut
No wrinkle, it'* freaking mandrel bent!!!! And that'* the chrome! It'* more of a gradual bend then the picture hows, and it looks the same as yours really. There isn't anything after the bend though like yours. I've had it on the car a little.
Opening the hole is no problem, i have access to a dremel here @ school, and could always put the IAT in the supplied hose to that extrusion if need be.
Don't be pissed i spend $40 and got everything but powdercoating
Opening the hole is no problem, i have access to a dremel here @ school, and could always put the IAT in the supplied hose to that extrusion if need be.
Don't be pissed i spend $40 and got everything but powdercoating