Too Much Air??
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Sep 2006
Location: Cleveland Ohio
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
Too Much Air??
Ok, so, Im deffinatly not a mechanic so Im gonna just throw this out there...
My birthday is March 2nd and Im gonna order new custom plates, which of course means ECheck time...Well the problem is my "SES" light is on...I dont remember if it was on before all this work was done honestly I cant, but I put on P Logs and ported rear manifold, fwi, 3" downpipe, 3" cat, 2.5" cat back....well my cat is already turning blue, which means its lean? right? well a guy at work suggested that I may need to upgrade my injectors to equal out the the air to fuel ratio?? Again if this is off, dont laugh lol Im not a mechanic and I didnt think of it hahaha HELP!!!
My birthday is March 2nd and Im gonna order new custom plates, which of course means ECheck time...Well the problem is my "SES" light is on...I dont remember if it was on before all this work was done honestly I cant, but I put on P Logs and ported rear manifold, fwi, 3" downpipe, 3" cat, 2.5" cat back....well my cat is already turning blue, which means its lean? right? well a guy at work suggested that I may need to upgrade my injectors to equal out the the air to fuel ratio?? Again if this is off, dont laugh lol Im not a mechanic and I didnt think of it hahaha HELP!!!
#2
Senior Member
Certified GM nut
Join Date: May 2005
Location: Wickliffe, Ohio
Posts: 2,155
Likes: 0
Received 0 Likes
on
0 Posts
Your current fuel injectors are not even close to being maxed out yet. Lean conditions do result in more heat but the catalytic converter is normally very hot. I would get your car on a scan tool and see what'* up; Autozone can even plug in and tell you the code(*) in less then 5 mins It'* very possible you just have a dirty MAF (Mass Airflow sensor) which can be cleaned easy or something of the likes.
Ed
Ed
#6
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Sep 2006
Location: Cleveland Ohio
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
Thanx for the advice guys...and Wren yes it is my problem?? I mean if its hurting my car?? What exactly is it doing wrong? You're the first to say so...
#7
Originally Posted by K-OtiK
Wren yes it is my problem?? I mean if its hurting my car?? What exactly is it doing wrong? You're the first to say so...
As for hurting, just in the performance department. You might be losing a little bit of power.
#8
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Sep 2006
Location: Cleveland Ohio
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by smellbird
Originally Posted by K-OtiK
Wren yes it is my problem?? I mean if its hurting my car?? What exactly is it doing wrong? You're the first to say so...
As for hurting, just in the performance department. You might be losing a little bit of power.
#9
Senior Member
Posts like a Camaro
Join Date: Jan 2004
Location: Aurora, Illinois
Posts: 922
Likes: 0
Received 0 Likes
on
0 Posts
Id be willing to bet anything you're going to find P0420, insufficient catalyst, for the code. I started getting it as soon as i got a 3" DP and cat....
Without pullying down i do kind of agree that 3" is overkill for your mods. However i don't quite buy this whole 3" exhaust is going to hurt your bottom end discussion. I know guys who are pretty involved in the GTP modding scene who claim this is nonsense. Has anyone tested this claim either at the track or on a dyno where the only variable changed was the 3" DP?
Without pullying down i do kind of agree that 3" is overkill for your mods. However i don't quite buy this whole 3" exhaust is going to hurt your bottom end discussion. I know guys who are pretty involved in the GTP modding scene who claim this is nonsense. Has anyone tested this claim either at the track or on a dyno where the only variable changed was the 3" DP?
#10
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Sep 2006
Location: Cleveland Ohio
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I see where you're going....I dont know if you remember this but I had motor trouble and I just had Ed Morad replace it with an L32...Well I still have the Gen 3 */C on there...I was probably gonna get the Gen V in May when we all get that check from Federal, I am going to do the Gen V and a smaller Pulley drop...is this going to help my "performance problem"