Changing front sway bar
#1
Senior Member
Posts like a Turbo
Thread Starter
Changing front sway bar
Is there a trick to changing this on my 03..I took off the tie rod links and still no go..what do I have to do to get this out?
#4
-- SITE DONATOR --
True Car Nut
I did mine by jacking the car up, removing both tires, disconnecting the downpipe, and then a half hour or so of cursing. Going back in wasn't much easier, especially since I replaced mine with an FE5 which is heavier.
#8
Senior Member
Posts like a Corvette
Join Date: Aug 2010
Posts: 1,337
Likes: 0
Received 0 Likes
on
0 Posts
#9
-- SITE DONATOR --
True Car Nut
The rear sway bar is a piece of cake compared to the front.
I have a custom exhaust and my downpipe was in the way of doing the front, may or may not be the case for you. It took a lot of wiggling, trying, and struggling for me to get it out without dropping the sub frame.
I have a custom exhaust and my downpipe was in the way of doing the front, may or may not be the case for you. It took a lot of wiggling, trying, and struggling for me to get it out without dropping the sub frame.