H-S roller rockers with pics
#1
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Feb 2003
Location: Sacramento, CA WCBF '06, '07 survivor
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
H-* roller rockers with pics
CLUB-GP has a 8 page post on H/* roller rockers
PLEASE take a look if you have H/* 1.9 rockers
ROD
PLEASE take a look if you have H/* 1.9 rockers
ROD
#3
Senior Member
True Car Nut
Here'* a link from 3800Pro..... they're probably a little less biased over there, plus you can get the official Intense stance on the problem.
http://www.3800pro.com/forum/showthread.php?t=4207
http://www.3800pro.com/forum/showthread.php?t=4207
#4
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Feb 2003
Location: Sacramento, CA WCBF '06, '07 survivor
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
clubgp general page 2 (ANYONE WITH ROLLER.....) 236 replies
ROD
p/* pics are on page 1 and page 7
ROD
p/* pics are on page 1 and page 7
#5
Thanks for the heads up Rod.
I will plan on checking mine out over the winter. It'* a fast easy check if I just do the front bank.
Edit - After reading thru all 8 pages, I think I will take the front valvecover off this weekend for a peak.
I will plan on checking mine out over the winter. It'* a fast easy check if I just do the front bank.
Edit - After reading thru all 8 pages, I think I will take the front valvecover off this weekend for a peak.
#6
Senior Member
True Car Nut
Join Date: Jul 2003
Location: Westerville, Ohio 2000 Black SSEi
Posts: 6,127
Likes: 0
Received 1 Like
on
1 Post
I'd like PDad to do it also since he has my original set which were the 1st production set. My current set showed no signs of this wear and they have been on for over a year.
#7
Senior Member
True Car Nut
Join Date: Jun 2003
Location: Purgatory
Posts: 6,313
Likes: 0
Received 0 Likes
on
0 Posts
Had my valve covers off a few weeks ago for new gaskets and everything was fine.
I have no way to test the spring tension but did retorgue the rockers and inspect valve guide clearance. I should have removed a few and inspected for wear but there was nothing alarming so I buttoned it up?
I've got about 20,000 miles on my 1.9:1 and they were used on 8 Ball first for about 5k before Rogue went 1x cam. I would expect some wear by this point and who knows maybe I'll find out this winter
I have no way to test the spring tension but did retorgue the rockers and inspect valve guide clearance. I should have removed a few and inspected for wear but there was nothing alarming so I buttoned it up?
I've got about 20,000 miles on my 1.9:1 and they were used on 8 Ball first for about 5k before Rogue went 1x cam. I would expect some wear by this point and who knows maybe I'll find out this winter
#10
Maybe it'* a sham
Bad press aimed at INTENSE to hurt them.
Only reason I could see for that kind of wear would be insufficient lubrication.
Maybe I installed the oil pressure mod for a reason.
Bad press aimed at INTENSE to hurt them.
Only reason I could see for that kind of wear would be insufficient lubrication.
Maybe I installed the oil pressure mod for a reason.