park ave sway bar size
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Dec 2010
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
park ave sway bar size
im looking at aftermarket poly sway bar bushings and end links, can anyone tell me the exact size of the front and rear sways on a 98 park ave ultra with the F41 suspension so i know what to order from energy susp.
thanks
thanks
#3
Senior Member
True Car Nut
Part number 9.8149R through energy for red and 9.8149G for black...Those are 4 and 1/4 inch otherwise it could be 2 and 3/8 inch youll have to look
#8
Senior Member
True Car Nut
Join Date: Jun 2007
Location: New Lenox, IL
Posts: 2,478
Likes: 0
Received 0 Likes
on
0 Posts
#9
Senior Member
Posts like a 4 Banger
Join Date: May 2009
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Bigest rear is 22mm bigest front is 34mm which came on the Deville . The same one we get the radiators support bars from. The 32mm and 34mm are very heavy. Especially if your carring them through the u-pull with your tools. Normally i take a hand truck but was only looking for small parts.
#10
Senior Member
Posts like a 4 Banger
Join Date: May 2009
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
By the way i have checked many sway bars in JY'* and they are not always the same in each make/model. I've seen low opt cars with bigger sways than models such as Park Ultra. So you need to check. An FE3 Bonne SSEI had a 30mm front. An 89 Bonne LE had a 22mm rear. Well you get the picture. But the caddy'* all had the bigger sways on them.
Thread
Thread Starter
Forum
Replies
Last Post