Coolant Elbow Idea! UPDATE***
#1
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Apr 2006
Location: Coon Rapids, Minnesota
Posts: 936
Likes: 0
Received 0 Likes
on
0 Posts
Coolant Elbow Idea! UPDATE***
i'm making a elbow outta a metal for the 96 and up series 2 3800. you know the elbow the comes from behind the tensioner pully to the intake... so yea i was wondering if any of you would be interested in buying one i'm not sure on a price right now, i just need to know if anyone would be interested in it. oh yea i am a machinest so these will be the real deal!!
#2
DINOSAURUS BOOSTUS
Expert Gearhead
I believe you could find plenty of interest. Change your title to mention something like Coolant Elbow idea. Mods will probably move it to Perf and Brain when they wake up as it is a brainstorm and would be great to thave.
The only catch I see is using an o ring very similar to the factory ones and having replacement o rings available for us crazy people that pull their intakes off for kicks.
I like it.!
The only catch I see is using an o ring very similar to the factory ones and having replacement o rings available for us crazy people that pull their intakes off for kicks.
I like it.!
#3
Senior Member
True Car Nut
Join Date: Feb 2003
Location: Philly
Posts: 4,508
Likes: 0
Received 0 Likes
on
0 Posts
I'm defintiely interested since I've replaced about 6 on my car already.
Will the machining be different from the size of the plastic since it has a different expansion rate?
Will the machining be different from the size of the plastic since it has a different expansion rate?
#4
Senior Member
True Car Nut
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 0 Likes
on
0 Posts
This elbow..were is it..i need to know this stuff now..
exact location?
exact location?
#5
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Apr 2006
Location: Coon Rapids, Minnesota
Posts: 936
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 95naSTA
I'm defintiely interested since I've replaced about 6 on my car already.
Will the machining be different from the size of the plastic since it has a different expansion rate?
Will the machining be different from the size of the plastic since it has a different expansion rate?
it will be made from the same grade of metal the intake is made out of! i guess i better get working on some then!!!
#6
DINOSAURUS BOOSTUS
Expert Gearhead
Originally Posted by SSEimatt93
This elbow..were is it..i need to know this stuff now..
exact location?
exact location?
#7
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Apr 2006
Location: Coon Rapids, Minnesota
Posts: 936
Likes: 0
Received 0 Likes
on
0 Posts
i need to know if more people are interested in this..... please say so or i'm making very limited amount of parts....
#8
Senior Member
Posts like a Camaro
Join Date: Mar 2004
Location: Waterloo, NY
Posts: 809
Likes: 0
Received 0 Likes
on
0 Posts
I'd be interested in this. I haven't had to take my intake off YET, but I do know that the shop that replaced my LIM gaskets installed a new elbow during the repair (man I can't wait for my warranty to wear out!).
Have a price in mind yet? Are they going to be annodized (or hard annodized)?
Have a price in mind yet? Are they going to be annodized (or hard annodized)?