Enkei Wheels
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Sep 2002
Location: Genoa, Illinois
Posts: 4,013
Likes: 0
Received 0 Likes
on
0 Posts
Enkei Wheels
Looking at some Enkeis to replace my chrome Epics and need a 101 teaching in offsets. Whats too much on our cars? I've got it centered down to two Enkei styles:
RS5 - 40 offset
DM5 - 38 offset
I like both and each is unique, but the offsets are slightly different. Anyone wanna play teacher for a few minutes?
RS5 - 40 offset
DM5 - 38 offset
I like both and each is unique, but the offsets are slightly different. Anyone wanna play teacher for a few minutes?
#3
Senior Member
Certified Car Nut
Here'* your answer kyle!
http://www.tirerack.com/wheels/tech/offset.htm
Here'* one possibility for ya....
EDIT: uh my link wasn't showing up.... :?
http://www.tirerack.com/wheels/tech/offset.htm
Here'* one possibility for ya....
EDIT: uh my link wasn't showing up.... :?
#4
Senior Member
True Car Nut
Join Date: Nov 2002
Location: Texarkana, Texas
Posts: 6,042
Likes: 0
Received 0 Likes
on
0 Posts
Stock Rims have a 43mm inset, either will be close enough I'd think
http://www.chris-longhurst.com/carbi...yre_bible.html
Inset or outset
This is very important. Ignore this and you can end up with all manner of nasty problems. This is the distance in mm between the centreline of the wheel rim, and the line through the fixing face. You can have inset, outset or neither. This determines how the suspension and self-centring steering behave. The most obvious problem that will occur if you get it wrong is that the steering will either become so heavy that you can't turn the car, or so light that you need to spend all your time keeping the bugger in a straight line. More mundane problems through ignoring this measurment can range from wheels that foul parts of the bodywork or suspension, to high-speed judder in the steering because the suspension setup can't handle that particular type of wheel. This figure will be stamped on the wheel somewhere as an ET figure.
This is very important. Ignore this and you can end up with all manner of nasty problems. This is the distance in mm between the centreline of the wheel rim, and the line through the fixing face. You can have inset, outset or neither. This determines how the suspension and self-centring steering behave. The most obvious problem that will occur if you get it wrong is that the steering will either become so heavy that you can't turn the car, or so light that you need to spend all your time keeping the bugger in a straight line. More mundane problems through ignoring this measurment can range from wheels that foul parts of the bodywork or suspension, to high-speed judder in the steering because the suspension setup can't handle that particular type of wheel. This figure will be stamped on the wheel somewhere as an ET figure.
#6
Senior Member
True Car Nut
Thread Starter
Join Date: Sep 2002
Location: Genoa, Illinois
Posts: 4,013
Likes: 0
Received 0 Likes
on
0 Posts
Hmmm...interesting info, thanks. I'm leaning towards the DM5'* because they have big spokes to make the car look mean. Oh I love the photoshopped image Jason!
RS5:
DM5:
RS5:
DM5:
#10
Senior Member
True Car Nut
Join Date: Nov 2002
Location: Texarkana, Texas
Posts: 6,042
Likes: 0
Received 0 Likes
on
0 Posts
you photoshopped that? great work man, i thought he bought them and installed them for the first ten seconds.....
(the RS5'* are the perfect rim)
(the RS5'* are the perfect rim)