had some time to kill, so i thought id put together a small mod-list, essentially following the layout set by intense'* site, and basically stopped at stage 3. didnt go any further, as i will probably not get further than halfway down the list, at my current rate on my current engine. but input is always helpful, as this will be a document i will have saved on my computer. (the "X'*" are things i already have done or am working on). please note that this list is not based on my current knowledge level, but based on the knowledge level i wish to attain.

X 179.99 - FWI
X 9.99 - Thermostat
X 4.99 - Thermostat O-Ring
X 3.99 - Thermostat Gasket
X 10.74 - Autolite 605 (6)
X 69.99 - Plug Wires
X-------
X 99.99 - Pulley (3.4)
X 21.99 - Belt (GB6-715)
X 99.99 - PCM reprogram
- Port & Polish Charger
-------
235.32 - Powerslot [Front] Rotors #8664PSL & #8664PSR
100 - Ceramic Pads (2)
239.99 - AeroForce ScanGauge
10 - Solid Motor Mount
-------
10.74 - Autolite 104 (6)
69.99 - Plug Wires
519.97 - Roller/Rocker/Pushrod/Valvesprings 1.9:1
99.99 - PCM reprogram
-------
699.99 - Ceramic-coated Headers
89.99 - Header Installation Kit
179.99 - High-Flow Cat/02 Simulator
99.99 - Pulley (3.2)
29.99 - Tensioner
10.74 - Autolite 103 (6)
69.99 - Plug Wires
99.99 - PCM reprogram
-------


as always, any input would be appreciated.