88* and almost 0* KR
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Dec 2002
Location: Sauk Centre, MN
Posts: 5,459
Likes: 0
Received 0 Likes
on
0 Posts
88* and almost 0* KR
Just went and did a scan on my 95 with Nate'* scantool.
Did a 0-100 run and it showed 0 KR up to the 2-3 shift where it showed 1-2* from 80-85 (just after the 1-2) shift, then back to 0.
Still not running my TR6'*, and with 92 octane.
Showing as much as 11* advance, but mostly in the 6-9 range.
Did a 0-100 run and it showed 0 KR up to the 2-3 shift where it showed 1-2* from 80-85 (just after the 1-2) shift, then back to 0.
Still not running my TR6'*, and with 92 octane.
Showing as much as 11* advance, but mostly in the 6-9 range.
#2
Senior Member
Posts like a Corvette
Join Date: Jul 2004
Location: Bolingbrook, IL Location: Clarkston, MI
Posts: 1,256
Likes: 0
Received 0 Likes
on
0 Posts
80-85 MPH? You mean 2-3 shift?
As far as the timing 6-9* seems low esp. for not having KR. Is that timing at WOT? Does it bounce around?
I use to get the same KR on the 2-3 shift but now I see 0* KR all the way up to 110+ then KR starts to come in. My timing locks on to 12* for the whole time.
I'd like to bump timing up and reduce the boost I run. To run the pulley I run it costs HP, timing is free (no HP to add timing).
As far as the timing 6-9* seems low esp. for not having KR. Is that timing at WOT? Does it bounce around?
I use to get the same KR on the 2-3 shift but now I see 0* KR all the way up to 110+ then KR starts to come in. My timing locks on to 12* for the whole time.
I'd like to bump timing up and reduce the boost I run. To run the pulley I run it costs HP, timing is free (no HP to add timing).
#3
Senior Member
True Car Nut
Thread Starter
Join Date: Dec 2002
Location: Sauk Centre, MN
Posts: 5,459
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by llBlazin_llLo
80-85 MPH? You mean 2-3 shift?
As far as the timing 6-9* seems low esp. for not having KR. Is that timing at WOT? Does it bounce around?
I use to get the same KR on the 2-3 shift but now I see 0* KR all the way up to 110+ then KR starts to come in. My timing locks on to 12* for the whole time.
I'd like to bump timing up and reduce the boost I run. To run the pulley I run it costs HP, timing is free (no HP to add timing).
As far as the timing 6-9* seems low esp. for not having KR. Is that timing at WOT? Does it bounce around?
I use to get the same KR on the 2-3 shift but now I see 0* KR all the way up to 110+ then KR starts to come in. My timing locks on to 12* for the whole time.
I'd like to bump timing up and reduce the boost I run. To run the pulley I run it costs HP, timing is free (no HP to add timing).
Down low in the rpm'* it completely gutless, but up in the 3500+ rpm range it really just takes off ....even had a nasty torque steer occasion on the 1-2 upshift that sent me back and forth in my lane, beyond my control.
#5
Senior Member
True Car Nut
Thread Starter
Join Date: Dec 2002
Location: Sauk Centre, MN
Posts: 5,459
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by J Wikoff
What is it you've done to keep KR at bay like that?
I have my ceramic coated PEM'*, 3" DP, 3" HF Magnaflow cat, 3" HF resonator, and 3" piping to the muffler, 180* t-stat, and my TEP CAI (which appears isn't doing to well at shielding heat so I'm having the pipe powdercoated and will be making a better CA box).
#6
Junior Member
Posts like a Ricer Type-R
With your exhaust setup, I'm not surprised you have no KR. Even though I'm running FAR too small of a pulley for the performance gain, I have no KR either.
But your 3" exhaust is killing you. We've discussed this before. Even though you've got no KRr, it'* still hurting you. The only two 92-95 L67'* that ever tried 3" exhaust lost low end.
But your 3" exhaust is killing you. We've discussed this before. Even though you've got no KRr, it'* still hurting you. The only two 92-95 L67'* that ever tried 3" exhaust lost low end.
#7
Senior Member
True Car Nut
Join Date: Sep 2004
Location: Farmington, Minnesota =MWBF '05 SURVIVOR= =CEBF '06 SURVIVOR= =August '06 COTM=
Posts: 9,130
Likes: 0
Received 0 Likes
on
0 Posts
Bill, answer ur phone for once.
Anyways, got my exhaust fixed up today at the place here in town that Marty and Travis used, great place, got my hi flo in, and my hangers replaced, and the doughnut done....
Oddly enough, with what Marty all has done, I'm hangin' on him pretty hard light to light.... I start pulling SLIGHTLY on him right before the shift, and I can give Travis in his * II a very hard run for his money.
But against Marty, his Low end torque is still about even with mine, but I'm also running heavy ***'d 18'* and about 200 lbs of stereo in the trunk with over 3/4 tank of fuel.
I think personally, both cars mod'd the same about, except him having Toulene in his tank, that yes, that 3" set up is killing him. Or something just ain't right.
Anyways, got my exhaust fixed up today at the place here in town that Marty and Travis used, great place, got my hi flo in, and my hangers replaced, and the doughnut done....
Oddly enough, with what Marty all has done, I'm hangin' on him pretty hard light to light.... I start pulling SLIGHTLY on him right before the shift, and I can give Travis in his * II a very hard run for his money.
But against Marty, his Low end torque is still about even with mine, but I'm also running heavy ***'d 18'* and about 200 lbs of stereo in the trunk with over 3/4 tank of fuel.
I think personally, both cars mod'd the same about, except him having Toulene in his tank, that yes, that 3" set up is killing him. Or something just ain't right.
#8
Junior Member
Posts like a Ricer Type-R
That 3" exhaust is taking away any weight advantage he would have had off the line apparently. In effect, it'* almost had the same effect as not putting a smaller pulley on.
#9
Senior Member
Posts like a Corvette
Join Date: Jul 2004
Location: Bolingbrook, IL Location: Clarkston, MI
Posts: 1,256
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by OLBlueEyesBonne
Originally Posted by llBlazin_llLo
80-85 MPH? You mean 2-3 shift?
As far as the timing 6-9* seems low esp. for not having KR. Is that timing at WOT? Does it bounce around?
I use to get the same KR on the 2-3 shift but now I see 0* KR all the way up to 110+ then KR starts to come in. My timing locks on to 12* for the whole time.
I'd like to bump timing up and reduce the boost I run. To run the pulley I run it costs HP, timing is free (no HP to add timing).
As far as the timing 6-9* seems low esp. for not having KR. Is that timing at WOT? Does it bounce around?
I use to get the same KR on the 2-3 shift but now I see 0* KR all the way up to 110+ then KR starts to come in. My timing locks on to 12* for the whole time.
I'd like to bump timing up and reduce the boost I run. To run the pulley I run it costs HP, timing is free (no HP to add timing).
Down low in the rpm'* it completely gutless, but up in the 3500+ rpm range it really just takes off ....even had a nasty torque steer occasion on the 1-2 upshift that sent me back and forth in my lane, beyond my control.
#10
Senior Member
True Car Nut
Join Date: Sep 2004
Location: Farmington, Minnesota =MWBF '05 SURVIVOR= =CEBF '06 SURVIVOR= =August '06 COTM=
Posts: 9,130
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by llBlazin_llLo
Originally Posted by OLBlueEyesBonne
Originally Posted by llBlazin_llLo
80-85 MPH? You mean 2-3 shift?
As far as the timing 6-9* seems low esp. for not having KR. Is that timing at WOT? Does it bounce around?
I use to get the same KR on the 2-3 shift but now I see 0* KR all the way up to 110+ then KR starts to come in. My timing locks on to 12* for the whole time.
I'd like to bump timing up and reduce the boost I run. To run the pulley I run it costs HP, timing is free (no HP to add timing).
As far as the timing 6-9* seems low esp. for not having KR. Is that timing at WOT? Does it bounce around?
I use to get the same KR on the 2-3 shift but now I see 0* KR all the way up to 110+ then KR starts to come in. My timing locks on to 12* for the whole time.
I'd like to bump timing up and reduce the boost I run. To run the pulley I run it costs HP, timing is free (no HP to add timing).
Down low in the rpm'* it completely gutless, but up in the 3500+ rpm range it really just takes off ....even had a nasty torque steer occasion on the 1-2 upshift that sent me back and forth in my lane, beyond my control.
Later in the evening we were getting some 12-13*'*.....But those were almost just spikes. But as a consistant avg we were pulling about 6-9* advance.
When it comes down to his KR.....On one run, and it'* the only run I saw it do this, at about 82-83 it shifted into third gear, and the KR bounced up to 7* for a few seconds....Other than that, he'* running about 1-2* on a rare occasion......Not consistantly, or in any situation that could be reproduced on command.