PEM series 1 NA
#1
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Apr 2006
Location: In the mitten
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
PEM series 1 NA
Hey guys, what kind of power increase would be expected with these on a L27? I was planning on doing the cold air induction and a few other mods too. Is there some power increase in this?
Thanks,
Chris
Thanks,
Chris
#2
Junior Member
Posts like a Ricer Type-R
5hp? You're not in the MUST HAVE category as the L67, as you flow considerably less, and don't have the advantage to add flow easily.
If you're going to take them off anyway to fix cracks, by all means, work them over.
If you're going to take them off anyway to fix cracks, by all means, work them over.
#3
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Apr 2006
Location: In the mitten
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by willwren
5hp? You're not in the MUST HAVE category as the L67, as you flow considerably less, and don't have the advantage to add flow easily.
If you're going to take them off anyway to fix cracks, by all means, work them over.
If you're going to take them off anyway to fix cracks, by all means, work them over.
Thread
Thread Starter
Forum
Replies
Last Post
Glasuan
Performance, Brainstorming & Tuning
11
02-15-2005 01:38 PM