mmm exhaust
Well I had my car at my cousins exhaust shop on Friday, for $80 CAD he installed a new 2.5" DPand 304 stainless 2.5" pipe front-back, I had him throw a high flow Magnaflow catalytic converter on ($90) and a Magnaflow muffler ($130) on it. I also installed a adjustable shift modulator on this weekend. My car now shifts a bit harder, and now sounds and runs GREAT. I
don't think I have lost any low-end torque going to the 2.5" exhaust system, but I deffinately find it alot less raspy. I just thought i'd share my experience with my new parts, the car is deffinately more fun to drive now and i'm lovin' it. Next i'm going to get a 180 T-stat and then, I am going to do some PEM's as I have already acquired another set of manifolds for free I just have to pull them off the car. After those 2 mod's I am thinking Yella-Terra roller rockers and a raised redline of 6000 or so. Does this sound good to you 3800 gear heads? any respones are appreciated. thanks guys! 8) |
6k seems a little up there for even a rockered LN3.
The PEMs and rockers should wake your car up though. You might have to convert to newer heads to get those rockers to work though? |
You won't even need a 6k redline in a LN3 on a stock cam. There is no power being made up in that area, unless you look into a cam, rockers, springs, etc. Plus your heads will not accept the Yella Terra rockers.
|
I was on the aussie's site before and, I believe they sell rockers and rods specifically for LN3 motors, I can redline my motor to 5500rpm as it is stock rockers and nothing done to the PCM, so I thought 6000 was reachable, maybe not though? what ya'll think or am I just crazy and heading towards a blown up motor? thanks guys. A cam later on would also deffinately be a possibility......
|
i think what he is saying is that pushing your redline beyond 5500 isn't really going to gain you anything, since your engine's power is already dropping off at that point.
|
All times are GMT -4. The time now is 01:34 PM. |
© 2024 MH Sub I, LLC dba Internet Brands