hv3 to dorman
well got my HV3 finaly and the first thing a did is to try it it my dorman intake because my stock one is back on my engine .and i WONT fit the dorman intake whitout a lot of grinding .im lucky my stock intake is still like new but for the one whit a dorman intake the HV3 wont fit
https://i178.photobucket.com/albums/...ick/hv3004.jpg https://i178.photobucket.com/albums/...ick/hv3002.jpg https://i178.photobucket.com/albums/...ick/hv3001.jpg |
I'm sorry, man, but I just gotta say that build quality looks absolutely horrible. It looks like they might have spent 10 cents at the most to make that. If I were you, I'd want my money back and look for other alternatives
Just my two cents, I know it wasn't asked for... |
I'm sorry, man, but I just gotta say that build quality looks absolutely horrible |
I would like to see what it looks like sitting on the LIM.... Research and developement reasons only...
|
what exactly is the purpose of this? Forgive me, this is my first time seeing a picture of it.
|
Shorter runners.
|
1 Attachment(s)
what exactly is the purpose of this? Forgive me, this is my first time seeing a picture of it. it to replace the stock insert and should give about 30 hp on the top end stock insert Attachment 38456 |
2 Attachment(s)
I would like to see what it looks like sitting on the LIM.... Research and developement reasons only... here for you research Attachment 38454 Attachment 38455 https://i178.photobucket.com/albums/.../hv3lim001.jpg tell me if you need more precise pict |
Is there a way to modify the stock runners to get the same outcome as a HV3?
|
Mines looks nothing like that Don. Not even red lol. I will take some pics later, but it doesnt look like that.
|
Mines looks nothing like that Don. is it only the color or the shape .i know they where out of stock so maybe i got the older version show me the pict i remenber seeing some red and some where black but the shape look the same ? |
4 Attachment(s)
Yea, color and quality. I dont have bubbles or anything.
Attachment 38449 Attachment 38450 Attachment 38451 Attachment 38452 |
how tall are the runners? I want to try making one.
|
They look to be about an inch. I thinking of making runners out of 1/4 in. aluminum stock and about 1.5 inches tall the welding an aluminum plate to the tops of the runners to hold them in place. pretty much like an aluminum HV3. Of course I would do some research to find the optimal length for the runners just using 1.5 as a ball park figure.
|
well i got a very bad reply from zzperformance they say they lost money on this sales they will replace it if a pay to send it back to them i think this is bad for bussiness to sell bad quality and not give sastisfaction to there customer
|
All times are GMT -4. The time now is 03:58 PM. |
© 2024 MH Sub I, LLC dba Internet Brands