Cold air intake??
#3
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
there is nothing made for your car, but you can do what mant others have done. Go to Autozone or ebay, and get a civic intake. you a coupler that is made of silicon or you can use your accordian tube......you will need to cut to to length and then get a K&N filter for it. Dont get anything else, they hold water and are not effective. After you have that done you need to make a heatshield. It is really simple and there are tons of ways to make it. you car get away with this project for under 100
#4
Junior Member
Posts like a Ricer Type-R
Ebay intakes usually lack an important ingredient or two. Length and quailty come to mind.
Try the civic pipe from Autozone and a K&N RX4750 filter.
There'* some help here:
http://www.bonneville.fearthepearl.c....php?page=mods
Keep in mind, and INTAKE is the pipe and filter. A CAI is a sheild that goes around the filter to keep it from drawing hot engine bay air. Both will be custom.
Try the civic pipe from Autozone and a K&N RX4750 filter.
There'* some help here:
http://www.bonneville.fearthepearl.c....php?page=mods
Keep in mind, and INTAKE is the pipe and filter. A CAI is a sheild that goes around the filter to keep it from drawing hot engine bay air. Both will be custom.
#5
Junior Member
Posts like a Ricer Type-R
Read this one too:
http://www.bonnevilleclub.com/techinfo/?article=40
The Techinfo link at the top of the page has a ton of information.
http://www.bonnevilleclub.com/techinfo/?article=40
The Techinfo link at the top of the page has a ton of information.
Thread
Thread Starter
Forum
Replies
Last Post