Room for CAI?
#2
Junior Member
Posts like a Ricer Type-R
You have it easier than I did. I have the double washer tank for the headlamp washers.
You have much more room than my 93. The exact same amount as any SE or SLE out there.
Why would you think it'* tight when there are so many here?
You have much more room than my 93. The exact same amount as any SE or SLE out there.
Why would you think it'* tight when there are so many here?
#4
Guest
Posts: n/a
Originally Posted by willwren
You have it easier than I did. I have the double washer tank for the headlamp washers.
You have much more room than my 93. The exact same amount as any SE or SLE out there.
Why would you think it'* tight when there are so many here?
You have much more room than my 93. The exact same amount as any SE or SLE out there.
Why would you think it'* tight when there are so many here?
#6
DINOSAURUS BOOSTUS
Expert Gearhead
Originally Posted by Hans
my pipe rubs aganist the air compressor.
I did this on my 95 Ei and it cleared by an inch or two. Was perfect!
#7
Guest
Posts: n/a
Originally Posted by BillBoost37
Originally Posted by Hans
my pipe rubs aganist the air compressor.
I did this on my 95 Ei and it cleared by an inch or two. Was perfect!
I'm going to talk to a buddy about hooking me up with "employee discounts" on everything i need this weekend.
#8
Junior Member
Posts like a Ricer Type-R
I cut my reducer at an angle, and have the better angle of the ADTR pipe, but the 92 and 93 compressor location still is too close. Closer than the 94/95 anyway.
#9
Senior Member
Certified Car Nut
Join Date: Oct 2002
Posts: 11,308
Likes: 0
Received 0 Likes
on
0 Posts
I was looking at that pic and wondered what was different between that and mine. And of course, the washer bottle, as Bill said. I got rid of my double washer bottle in 'Runner 1 to allow more room for a CAI. You should have some fun making an intake to fit that corner.
Gotta love that stock 'triple-resonated' intake
Gotta love that stock 'triple-resonated' intake