Taylor Wires
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Jul 2003
Location: Westerville, Ohio 2000 Black SSEi
Posts: 6,127
Likes: 0
Received 1 Like
on
1 Post
Taylor Wires
Ok, expecting my wires and ngk plugs any day now. Anybody have suggestions on changing the back 3 plugs, wires? Seems pretty cramped to get back there. Thought about just having a shop do it, but they want 100.00 bucks. Also anybody know what the gap size should be for the NGK iridiums? Do they normally come pregapped?
Thanks
Thanks
#2
Senior Member
Posts like a Northstar
Join Date: Feb 2003
Location: Mount Vernon, Ohio
Posts: 530
Likes: 0
Received 0 Likes
on
0 Posts
The back three aren't as bad as they look...I thought the same thing...just use short extension...no swivel.
YELLOW...so are mine...I also used the NGK Iridium'*...they came in at about .055-.058 so I left them that way...
So far so good....
YELLOW...so are mine...I also used the NGK Iridium'*...they came in at about .055-.058 so I left them that way...
So far so good....
#3
Junior Member
Posts like a Ricer Type-R
yup. I think you'll find it easier than you think. The good news is you don't have the Strut Tower Bar to get in the say. That'* actually the most inconvenient part about it.
Thread
Thread Starter
Forum
Replies
Last Post
BusMaster007
Performance, Brainstorming & Tuning
4
04-02-2003 06:48 AM