Question about stock pulleys
04-23-2003, 09:53 AM
#1
Junior Member
Thread Starter
Join Date: Apr 2003
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Question about stock pulleys
Will a stock 93 2.5" pully fit right onto a stock 95 supercharger? I have a 95 SE Supercharged and if I put that smaller pulley on my SC do I need to worry about causing additional problems?
04-23-2003, 10:01 AM
#2
Junior Member
Join Date: May 2002
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
I have an aftermarket 2.5 pulley on my '95 SC. You can also take a 2.5 from a '93 and get it to work. They are essentially the same pulley.
If you do do that I would also highly recommend the following items first to make sure your ride keeps running strong. Get a 180 T-stat, Tranny cooler is always good, CAI and possibly exhaust. If you put the smaller pulley on you want to make sure that the car can breathe in and exhale as good as possible to get the most out of the pulley.
...and welcome to the club!
If you do do that I would also highly recommend the following items first to make sure your ride keeps running strong. Get a 180 T-stat, Tranny cooler is always good, CAI and possibly exhaust. If you put the smaller pulley on you want to make sure that the car can breathe in and exhale as good as possible to get the most out of the pulley.
...and welcome to the club!
04-23-2003, 03:17 PM
#3
Senior Member
True Car Nut
Originally Posted by SSEi95
I have an aftermarket 2.5 pulley on my '95 SC. You can also take a 2.5 from a '93 and get it to work. They are essentially the same pulley.
If you do do that I would also highly recommend the following items first to make sure your ride keeps running strong. Get a 180 T-stat, Tranny cooler is always good, CAI and possibly exhaust. If you put the smaller pulley on you want to make sure that the car can breathe in and exhale as good as possible to get the most out of the pulley.
...and welcome to the club!
If you do do that I would also highly recommend the following items first to make sure your ride keeps running strong. Get a 180 T-stat, Tranny cooler is always good, CAI and possibly exhaust. If you put the smaller pulley on you want to make sure that the car can breathe in and exhale as good as possible to get the most out of the pulley.
...and welcome to the club!
Welcome aboard. You'll find a relaxed fun atmosphere here.. and very informative too. Enjoy your stay
04-23-2003, 05:31 PM
#6
Senior Member
True Car Nut
Join Date: Jan 2003
Location: Bloomington-Normal, IL 1997 SE
Posts: 3,734
Likes: 0
Received 0 Likes
on
0 Posts
Cold Air Intake Its basically an intake with a heat shield on it. The heat shields dont do alot, if you want the intake check out the bonneville store at www.ADTR.com
04-23-2003, 05:32 PM
#7
Senior Member
True Car Nut
Join Date: Jan 2003
Location: Bloomington-Normal, IL 1997 SE
Posts: 3,734
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
95naSTA
Performance, Brainstorming & Tuning
12
03-20-2003 10:51 PM