Exhaust pics requested by a few members:
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Exhaust pics requested by a few members:
This is the 93 SSEi:
Inlet and outlet, driver'* side:
Same side, showing the cut and weld to fit the stock intermediate pipe to the inlet:
Passenger side showing how the stock 2.25" outlet was sleeved to the 2.5" muffler:
Inside the last bend of the intermediate pipe before entering the muffler inlet:
OEM hanger still attached to the OEM outlet at the top of the pic:
One BIG ARSE RESONATOR :
Inlet and outlet, driver'* side:
Same side, showing the cut and weld to fit the stock intermediate pipe to the inlet:
Passenger side showing how the stock 2.25" outlet was sleeved to the 2.5" muffler:
Inside the last bend of the intermediate pipe before entering the muffler inlet:
OEM hanger still attached to the OEM outlet at the top of the pic:
One BIG ARSE RESONATOR :
#5
Junior Member
Posts like a Ricer Type-R
Thread Starter
It doesn't matter at the outlets. They're both 2.25" and have more than sufficient flow. You'd gain nothing changing those to mandrel.
That'* a 3" resonator slipped over the OEM intermediate pipe. I don't recall how long it is, but it barely fits between the cat and the first jog in the intermediate pipe.
That'* a 3" resonator slipped over the OEM intermediate pipe. I don't recall how long it is, but it barely fits between the cat and the first jog in the intermediate pipe.
#6
Guest
Posts: n/a
Thread
Thread Starter
Forum
Replies
Last Post
SD-421
Your Ride: GM Pictures & Videos
11
07-05-2004 12:44 PM
Jim W
Your Ride: GM Pictures & Videos
50
04-20-2004 10:59 AM