Got a few quick questions
I've searched tech info..and i don't see a list of items needed to do a complete L67 swap into a L36 equipped vechicle of the same year..i know that many say it's cheaper to get an SSEi than to swap but i want to keep my car, i just want boost. Turbo would cost me more and after much reasearch and questioning i have decided that swapping a L67 into my car and working from there is my best bet.
say i were to get a L67 motor and a 4560E hd trans for my 97 SE i looked at parts for both and all motor mounts and ac componets are the same So technically all i would need is the following: L67 Motor 4t60e HD trans cv shafts for said trans Spitter thingy for the harness to adapt the 2 sensors PCM tuned for L67 for the year of 1997 FSM for the 97 H bodies If this is correct please help me out..this is technically all i need right? James |
Probably be easier to use a 97 cluster, and 97 wiring harnesses as well. that way it's almost OE setup.
|
You may have a 4T60 in your SE, but a 97 with an L67 will very likely have a 4T65E.
|
All times are GMT -4. The time now is 01:29 AM. |
© 2024 MH Sub I, LLC dba Internet Brands