Performance, Brainstorming & Tuning Talk about modifications, or anything else associated with performance enhancements. Have a new idea for performance/reliability? Post it here. No idea is stupid! (please use Detailing and Appearance for cosmetic ideas)

rice pipe on... too much air?

Old 02-04-2005, 12:39 AM
  #1  
Senior Member
Posts like a Turbo
Thread Starter
 
rhalford15's Avatar
 
Join Date: Jan 2004
Location: Springfield, Illinois
Posts: 376
Likes: 0
Received 0 Likes on 0 Posts
rhalford15 is on a distinguished road
Default rice pipe on... too much air?

I put the autozone universal pipe on. I used a generic rice filter from advance auto parts. I notice that when I accelerate hard the engine (gasps?) real herkey jerkey like. I does pick up after a while. What is the problem? anyone?

Rodney
Old 02-04-2005, 12:47 AM
  #2  
Junior Member
Posts like a Ricer Type-R
 
willwren's Avatar
 
Join Date: Aug 2002
Posts: 11
Likes: 0
Received 4 Likes on 4 Posts
willwren is on a distinguished road
Default

Too little air, and you need time for the PCM to adjust.

Throw the fake filter away (DrJay'* held WATER it was so restrictive), get a real performance cone, and give it a couple days to learn.
Old 02-04-2005, 12:49 AM
  #3  
Senior Member
Posts like a Turbo
Thread Starter
 
rhalford15's Avatar
 
Join Date: Jan 2004
Location: Springfield, Illinois
Posts: 376
Likes: 0
Received 0 Likes on 0 Posts
rhalford15 is on a distinguished road
Default

Originally Posted by willwren
Too little air, and you need time for the PCM to adjust.

Throw the fake filter away (DrJay'* held WATER it was so restrictive), get a real performance cone, and give it a couple days to learn.
Yes sir, and thank you.
Old 02-04-2005, 10:56 AM
  #4  
Senior Member
Posts like a Corvette
 
bmsgaffer86's Avatar
 
Join Date: Jan 2003
Posts: 1,250
Likes: 0
Received 0 Likes on 0 Posts
bmsgaffer86 is on a distinguished road
Default

Originally Posted by rhalford15

Yes sir, and thank you.
now THAT is proper respect!
Old 02-04-2005, 05:34 PM
  #5  
Senior Member
Posts like a Corvette
 
jachin's Avatar
 
Join Date: Sep 2003
Location: springfield il
Posts: 1,369
Likes: 0
Received 1 Like on 1 Post
jachin is on a distinguished road
Default

rodney i have a question, when you stomp on the petal, and you hear the sc start to wine, is it a steady, uninnerupted wine or does it sound like it staggers? I noticed a while back that mine would do that, where it almost sounds like its under water or something. It was because the air compressor is loose and its vibrating, anc because ur cone might rest up against it, it causes it to do the same thing. IM not sure if this affects performance, but you might want to check it out
Old 02-05-2005, 02:11 AM
  #6  
Senior Member
Posts like a Northstar
 
SSEi_MN's Avatar
 
Join Date: Apr 2004
Location: Shoreview, MN
Posts: 603
Likes: 0
Received 0 Likes on 0 Posts
SSEi_MN is on a distinguished road
Default

how about this one? i got a rice pipe and basicaly ever since ive noticed LAG and nasty RESPONSE. from a quarter boost to half boost there is not difference in accel (just wasting gas???). anyoen else experience this at all after new intakes?
Old 02-05-2005, 11:03 AM
  #7  
Junior Member
Posts like a Ricer Type-R
 
willwren's Avatar
 
Join Date: Aug 2002
Posts: 11
Likes: 0
Received 4 Likes on 4 Posts
willwren is on a distinguished road
Default

Describe your filter in more detail than your sig shows, and tell us exactly what you did to the MAF screen. Hell, a picture of the setup would be good, too.
Old 02-05-2005, 12:34 PM
  #8  
Senior Member
Posts like a Northstar
 
SSEi_MN's Avatar
 
Join Date: Apr 2004
Location: Shoreview, MN
Posts: 603
Likes: 0
Received 0 Likes on 0 Posts
SSEi_MN is on a distinguished road
Default

i took off the old filter, cut 2 inches off the pipe to fit, coupler'ed the pipe on, and put the filter on, the hose clamps them all together. i took the maf screen out completley but didnt like the performance after a week or tow so i put it back on but drilled two little 1/3 inch holes in it for a little extra flow. that help?
Old 02-05-2005, 12:57 PM
  #9  
Junior Member
Posts like a Ricer Type-R
 
willwren's Avatar
 
Join Date: Aug 2002
Posts: 11
Likes: 0
Received 4 Likes on 4 Posts
willwren is on a distinguished road
Default

Smooth intake pipe? Brand of filter?

And drilling holes in a MAF screen would have a similar effect to not running one. In fact, it'* even possible that it made it worse.

You need GOOD laminar flow through a textbook intake in order to remove or modify the screen.

If you filter is a cheap knockoff, take it off the car, and fill it with water. If it holds water, ditch it for a better filter. Consider replacing your MAF screen, or improving the flow of the intake to be able to take it out completely.
Old 02-05-2005, 05:33 PM
  #10  
Senior Member
Posts like a Turbo
Thread Starter
 
rhalford15's Avatar
 
Join Date: Jan 2004
Location: Springfield, Illinois
Posts: 376
Likes: 0
Received 0 Likes on 0 Posts
rhalford15 is on a distinguished road
Default

Originally Posted by jachin
rodney i have a question, when you stomp on the petal, and you hear the sc start to wine, is it a steady, uninnerupted wine or does it sound like it staggers? I noticed a while back that mine would do that, where it almost sounds like its under water or something. It was because the air compressor is loose and its vibrating, anc because ur cone might rest up against it, it causes it to do the same thing. IM not sure if this affects performance, but you might want to check it out
It sounds like it staggers. It seems that lately my SC is louder than usual.

Thread Tools
Search this Thread
Quick Reply: rice pipe on... too much air?



All times are GMT -4. The time now is 05:35 AM.