gauge install
 

I Have a mec oil press , elec water temp gauge any help on easy instill and were to run wires and oil line w/o FIRE

Thank mrsnuke

also i would too list mod and pic hows the easiest way
Thanks mrsnuke :D

I really wouldn't run the Mech oil gauge in the cabin if you don't have some aftermarket oiler/pressurizer etc, unless it's a race only car (which i doubt it is, if you're asking this question).

oil press
 

no it a street car so get a elec oil press gauge insted of a mec ok now the easiest place for the wires too be ran through the carw/o drilling holes where do i get the gauge pod i see in your cars thank agaun mrsnuke :D

You make the gauge pod yourself. You can get the universal pod to attach to your pillar trim from some auto parts stores.

You won't get that gauge wire through the firewall without drilling a hole. Why are you using an aftermarket gauge instead of the one you already have?

gauge piller
 

i dont like any stock i'm so used to autometer in my race cars maybe thats why plus there kool :roll:

How do you go about moving the boost gauge to a diff. location, or hooking up something in its place. I want it to be down by my shift knob?

I made this one for my car......if you would also like one PM me....im making them for members

http://www.bonnevilleclub.com/forum/...ght=pillar+pod



Here is a good read for you.....

http://www.bonnevilleclub.com/forum/...e=article&k=47

the writer of this might even help ya....LMAO