Supercharger swap
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Dec 2006
Location: westhampton NY
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Supercharger swap
My friend has a supercharged Bonneville 1992 and wants to sell it to me for little money ($250), but i only want to take the appropriate parts for a l67 swap, and give her my old N/A parts.
I should fanagle to take the :
Supercharger
Fuel injectors
Upper intake manifold
Supercharger belt
and what else?
I should fanagle to take the :
Supercharger
Fuel injectors
Upper intake manifold
Supercharger belt
and what else?
#2
Senior Member
True Car Nut
Join Date: Jun 2003
Location: Purgatory
Posts: 6,313
Likes: 0
Received 0 Likes
on
0 Posts
Whoa, wrong direction here.
You could do a series 1 L67 from a series 2 L36 but you need a whole lot more than top end parts. The pcm, fuel system including injectors, an interface for the tranny or a tranny swap....and on and on.
Naw not worth it in my opinion?
You could do a series 1 L67 from a series 2 L36 but you need a whole lot more than top end parts. The pcm, fuel system including injectors, an interface for the tranny or a tranny swap....and on and on.
Naw not worth it in my opinion?
#4
Member
Posts like a V-Tak
Thread Starter
Join Date: Dec 2006
Location: westhampton NY
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Ok soo your saying a supercharged 92, cannot be used at all for a 98 sse motor n/a swap
well............i havent looked at the engine yet, i bet the diffrence are obvious, soo if i had a supewrcharged 96-99 engine could i swap the top engine parts like i planned tooo?
well............i havent looked at the engine yet, i bet the diffrence are obvious, soo if i had a supewrcharged 96-99 engine could i swap the top engine parts like i planned tooo?
#8
Junior Member
Posts like a Ricer Type-R
Originally Posted by maxx11778
soo if i had a supewrcharged 96-99 engine could i swap the top engine parts like i planned tooo?
They are two different engines.
#9
Senior Member
True Car Nut
Join Date: Jul 2003
Location: Westerville, Ohio 2000 Black SSEi
Posts: 6,127
Likes: 0
Received 1 Like
on
1 Post
I'm sure you could do a few searches to see whats needed for the top end swap but from memory:
Supercharger,
Lower intake,
fuel injectors
Fuel rail
harmonic balancer
heads
various pulleys and tensioner assmblies
Wiring harness or adapters
PCM coding
and even after all that your running on a block with higher compression than a stock supercharged motor and putting the power through a light duty transaxle.
A few people have done this, some with good results, some with bad, YMMV.
Supercharger,
Lower intake,
fuel injectors
Fuel rail
harmonic balancer
heads
various pulleys and tensioner assmblies
Wiring harness or adapters
PCM coding
and even after all that your running on a block with higher compression than a stock supercharged motor and putting the power through a light duty transaxle.
A few people have done this, some with good results, some with bad, YMMV.
#10
Senior Member
Posts like a Corvette
I know there is the m90 adapter through zz that uses the l 36 heads and block but I know some one who did that and well he was calling ed morad not long after
Thread
Thread Starter
Forum
Replies
Last Post