Just found this engine....
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: May 2007
Location: Sycamore, IL (ILRt. 64 and ILRt. 23)
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
Just found this engine....
http://www.gmperformanceparts.com/En...896&engCat=rpo
Anyone know if this will bolt up to a 4T65E-HD? will its handle it? Its for an XLR and CTS-V (?) Just thought this would rip butt in a Bonne....
Anyone know if this will bolt up to a 4T65E-HD? will its handle it? Its for an XLR and CTS-V (?) Just thought this would rip butt in a Bonne....
#2
Senior Member
Certified Car Nut
Good luck building a 4t-65 to handle that, actually it'* a Northstar (obviously) so if ANY FWD tranny would work, it would be a 4t-80, but it'* not designed to be used in FWD either.
It'* going to be too tall for the chassis, there are NO motor mounts, it'* going to be very expensive (i'd wager between 15-20k for the motor itself) you'd need to build a custom ECU, fueling, etc... Best bet would be to show up at ZZP, Intense, etc with a huge check, get some stage 3/4 stuff, a turbo kit from one of them, etc....
But it is a VERY cool engine.
It'* going to be too tall for the chassis, there are NO motor mounts, it'* going to be very expensive (i'd wager between 15-20k for the motor itself) you'd need to build a custom ECU, fueling, etc... Best bet would be to show up at ZZP, Intense, etc with a huge check, get some stage 3/4 stuff, a turbo kit from one of them, etc....
But it is a VERY cool engine.
#3
Senior Member
Posts like a Turbo
Thread Starter
Join Date: May 2007
Location: Sycamore, IL (ILRt. 64 and ILRt. 23)
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
http://www.superchevyperformance.com...p/17802896.htm
$11,460.90.....
If I had money I would sooooooo take the time to make my bonne RWD with man trans and IRS(corvette?)..... a man can dream!!!!!!!!
$11,460.90.....
If I had money I would sooooooo take the time to make my bonne RWD with man trans and IRS(corvette?)..... a man can dream!!!!!!!!
#5
Senior Member
Certified Car Nut
Thread
Thread Starter
Forum
Replies
Last Post