THRASHER TORQUE ARMS?
#1
Guest
Posts: n/a
THRASHER TORQUE ARMS?
has anyone used or heard of the thrasher engineering torque arms. im looking into getting them , but want to see if anyone has heard good or bad on them.
they claim the stop torque steer by stiffening the lower control arm to stop bushing flex.
they claim the stop torque steer by stiffening the lower control arm to stop bushing flex.
#2
Senior Member
True Car Nut
PM turtlesse.. he is running a torque arm ( not sure of brand though ).. so hey may help you with that department.. but he still gets torque steer.. but guess that'* expected when you're running the amount of boost he'* on
#3
Senior Member
True Car Nut
Join Date: May 2003
Location: Holt, MI & Lima, OH
Posts: 3,022
Likes: 0
Received 0 Likes
on
0 Posts
The best way to get rid of torque steer on FWD cars is an LSD. The torque arms may help, but I don't know of anybody running them. I have not heard anything about them, except for what the description on their site says. Our GTP has virtually no torque steer since we installed the LSD. If I were in your position I would get a LSD, because not only will it help eliminate torque steer, but it will make your car quicker also.
#6
Senior Member
True Car Nut
Originally Posted by Nytro67
LSD= Limited Slip Differential
Anywho.. who makes them for Bonnevilles? and what about installs? I guess it'll have to be done professionally ?
#7
Senior Member
True Car Nut
Join Date: May 2003
Location: Holt, MI & Lima, OH
Posts: 3,022
Likes: 0
Received 0 Likes
on
0 Posts
Anywho.. who makes them for Bonnevilles? and what about installs? I guess it'll have to be done professionally ?
#8
Senior Member
Posts like a Corvette
Join Date: Jan 2002
Location: Cali
Posts: 1,587
Likes: 0
Received 0 Likes
on
0 Posts
There is alot more to it than that. lol actually the 4t60-e limited slip can be had and the unit costs 580.00 add shipping and call it 600.00. It would be a custom deal so he would (to do it properly) have to make a new pinion gear, or at least harden it.
The stock pinion can be broken by a 3.4 let alone a 3.8.
I have nothing against intense but my opinion is the 4t65-e limited slip they use does not lend itself to the 4t60-e as well as the C-ya racing unit. Oh the C-ya racing system is actually $500.00. There are other options but they are not out of the bag yet.
That said the cheapest deal would be to get torque bars made for your car.
Ty
The stock pinion can be broken by a 3.4 let alone a 3.8.
I have nothing against intense but my opinion is the 4t65-e limited slip they use does not lend itself to the 4t60-e as well as the C-ya racing unit. Oh the C-ya racing system is actually $500.00. There are other options but they are not out of the bag yet.
That said the cheapest deal would be to get torque bars made for your car.
Ty
#9
Junior Member
Posts like a Ricer Type-R
The Thrasher arms won't fit an H body. They do work, though. If you have a welder and a Farm implement supply near you, you can probably fab them up for less than 50 bucks and 3 hours. That'* my plan. I already picked the parts.