what works???....
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Aug 2005
Posts: 5,798
Likes: 0
Received 0 Likes
on
0 Posts
what works???....
our 2 major vendors have TONS for the Series 1 if you know what'* compatible.
EVERY SINGLE subsection on INTENSE has at least one product for us.
EVERY SINGLE subsection on INTENSE has at least one product for us.
P.*. links ARE our friends, so dont be afraid to link to the part your talking about
#2
Junior Member
Posts like a Ricer Type-R
http://www.intense-racing.com/Mercha...tegory_Code=BS
http://www.intense-racing.com/Mercha...tegory_Code=CS (you may need a custom idler somewhere).
http://www.intense-racing.com/Mercha...tegory_Code=CS
http://www.intense-racing.com/Mercha...tegory_Code=CS
http://www.intense-racing.com/Mercha...tegory_Code=IE
http://www.intense-racing.com/Mercha...tegory_Code=IE
http://www.intense-racing.com/Mercha...tegory_Code=IE
http://www.intense-racing.com/Mercha...tegory_Code=IE
http://www.intense-racing.com/Mercha...tegory_Code=IE
http://www.intense-racing.com/Mercha...tegory_Code=IE
http://www.intense-racing.com/Mercha...tegory_Code=IE
http://www.intense-racing.com/Mercha...tegory_Code=IE
http://www.intense-racing.com/Mercha...tegory_Code=IE
http://www.intense-racing.com/Mercha...tegory_Code=IE
http://www.intense-racing.com/Mercha...tegory_Code=IE
http://www.intense-racing.com/Mercha...tegory_Code=EX
http://www.intense-racing.com/Mercha...tegory_Code=EX
http://www.intense-racing.com/Mercha...tegory_Code=EX
http://www.intense-racing.com/Mercha...ategory_Code=A
http://www.intense-racing.com/Mercha...ategory_Code=A
First four on this page:
http://www.intense-racing.com/Mercha...tegory_Code=IF
http://www.intense-racing.com/Mercha...tegory_Code=IF
http://www.intense-racing.com/Mercha...tegory_Code=IF
This will turn into a kit for the S1 soon (test fit being shipped):
http://www.intense-racing.com/Mercha...tegory_Code=IF
http://www.intense-racing.com/Mercha...tegory_Code=IF
http://www.intense-racing.com/Mercha...tegory_Code=IF
http://www.intense-racing.com/Mercha...tegory_Code=IF
Every fluid and adhesive on this page, as well as the coolant bypass
O-rings and other misc parts:
http://www.intense-racing.com/Mercha...tegory_Code=GH
http://www.intense-racing.com/Mercha...egory_Code=PBF
Possible with slight modification:
http://www.intense-racing.com/Mercha...egory_Code=PBF
Possible, need to verify:
http://www.intense-racing.com/Mercha...egory_Code=PBF
http://www.intense-racing.com/Mercha...egory_Code=HCV
Would work without the R designation (OE series is the same as ours)
http://www.intense-racing.com/Mercha...egory_Code=HCV
http://www.intense-racing.com/Mercha...egory_Code=HCV
http://www.intense-racing.com/Mercha...tegory_Code=BE
http://www.intense-racing.com/Mercha...tegory_Code=BS
And I probably missed a few things, or didn't have time to cross-reference them.
http://www.intense-racing.com/Mercha...tegory_Code=CS (you may need a custom idler somewhere).
http://www.intense-racing.com/Mercha...tegory_Code=CS
http://www.intense-racing.com/Mercha...tegory_Code=CS
http://www.intense-racing.com/Mercha...tegory_Code=IE
http://www.intense-racing.com/Mercha...tegory_Code=IE
http://www.intense-racing.com/Mercha...tegory_Code=IE
http://www.intense-racing.com/Mercha...tegory_Code=IE
http://www.intense-racing.com/Mercha...tegory_Code=IE
http://www.intense-racing.com/Mercha...tegory_Code=IE
http://www.intense-racing.com/Mercha...tegory_Code=IE
http://www.intense-racing.com/Mercha...tegory_Code=IE
http://www.intense-racing.com/Mercha...tegory_Code=IE
http://www.intense-racing.com/Mercha...tegory_Code=IE
http://www.intense-racing.com/Mercha...tegory_Code=IE
http://www.intense-racing.com/Mercha...tegory_Code=EX
http://www.intense-racing.com/Mercha...tegory_Code=EX
http://www.intense-racing.com/Mercha...tegory_Code=EX
http://www.intense-racing.com/Mercha...ategory_Code=A
http://www.intense-racing.com/Mercha...ategory_Code=A
First four on this page:
http://www.intense-racing.com/Mercha...tegory_Code=IF
http://www.intense-racing.com/Mercha...tegory_Code=IF
http://www.intense-racing.com/Mercha...tegory_Code=IF
This will turn into a kit for the S1 soon (test fit being shipped):
http://www.intense-racing.com/Mercha...tegory_Code=IF
http://www.intense-racing.com/Mercha...tegory_Code=IF
http://www.intense-racing.com/Mercha...tegory_Code=IF
http://www.intense-racing.com/Mercha...tegory_Code=IF
Every fluid and adhesive on this page, as well as the coolant bypass
O-rings and other misc parts:
http://www.intense-racing.com/Mercha...tegory_Code=GH
http://www.intense-racing.com/Mercha...egory_Code=PBF
Possible with slight modification:
http://www.intense-racing.com/Mercha...egory_Code=PBF
Possible, need to verify:
http://www.intense-racing.com/Mercha...egory_Code=PBF
http://www.intense-racing.com/Mercha...egory_Code=HCV
Would work without the R designation (OE series is the same as ours)
http://www.intense-racing.com/Mercha...egory_Code=HCV
http://www.intense-racing.com/Mercha...egory_Code=HCV
http://www.intense-racing.com/Mercha...tegory_Code=BE
http://www.intense-racing.com/Mercha...tegory_Code=BS
And I probably missed a few things, or didn't have time to cross-reference them.
#4
Senior Member
Posts like a Turbo
Join Date: Oct 2006
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
yrah but alot of that stuff you could get anywhere. the only place ive found a supercharger gasket was zzp so its out there just look a lil harder and think outside the box
#6
Senior Member
Posts like a Turbo
Join Date: Oct 2006
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by its840
Originally Posted by Peterg22000
holy ***^ Bill, thats more them i ever expected
#7
Junior Member
Posts like a Ricer Type-R
The point is, you can get stuff you need from there. ZZP as well. It would take me half an hour to list all those.
Other items like pushrods and valvesprings are a little more difficult, but they're being worked on by 3 members here, and will be tested soon. Keep in mind Series 1 and LG3/LN3 pushrods are no longer available through GM. They've been discontinued. We're setting up another source for them now. Lifters can be purchased from ZZP. Just don't get the R series.
Because I've had valve float since the JET PCM raised my shiftpoints (falls flat at the top of second gear, and has for three years), and John Wikoff has the same issue with his car despite not being chipped, I'll be putting on 105# valvsprings, replacing my bad lifters, and putting in new custom pushrods (literally manufactured on Tuesday for me) soon. I have all those parts here now. Didja know stock S2 valvesprings are only 75#? But Series 1 are 80# at install height (valve closed)? Didja know we use the same valvesprings as the Grand National, but with sometimes varying install heights? Alot of work has been going on behind the scenes. One of the reasons is that a member here was shipped 135# valvesprings for his car by a vendor. That'* timing-chain breaking potential. All of this should be confirmed by February or so.
PeterG, do you have valve float at the top of second gear in perf shift mode with the Jet PCM?
Other items like pushrods and valvesprings are a little more difficult, but they're being worked on by 3 members here, and will be tested soon. Keep in mind Series 1 and LG3/LN3 pushrods are no longer available through GM. They've been discontinued. We're setting up another source for them now. Lifters can be purchased from ZZP. Just don't get the R series.
Because I've had valve float since the JET PCM raised my shiftpoints (falls flat at the top of second gear, and has for three years), and John Wikoff has the same issue with his car despite not being chipped, I'll be putting on 105# valvsprings, replacing my bad lifters, and putting in new custom pushrods (literally manufactured on Tuesday for me) soon. I have all those parts here now. Didja know stock S2 valvesprings are only 75#? But Series 1 are 80# at install height (valve closed)? Didja know we use the same valvesprings as the Grand National, but with sometimes varying install heights? Alot of work has been going on behind the scenes. One of the reasons is that a member here was shipped 135# valvesprings for his car by a vendor. That'* timing-chain breaking potential. All of this should be confirmed by February or so.
PeterG, do you have valve float at the top of second gear in perf shift mode with the Jet PCM?
Thread
Thread Starter
Forum
Replies
Last Post