danthurs tune
#23
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Apr 2011
Location: Walled lake michigan
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Ya thanks guys Dan will take good care of it. I'm dropping it back to him for the correction.
I'm just curious if the sensor is bad. I did not replace it. Although there was no light till about the second d day of driving after the exhaust work.
I'm just curious if the sensor is bad. I did not replace it. Although there was no light till about the second d day of driving after the exhaust work.
#25
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Apr 2011
Location: Walled lake michigan
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Yikes. Not to sure. I'm accully embarrassed to say it'* a glass pk for now; just till the do w hiflo from zzp shows.
To be honest...
To be honest...
#26
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Apr 2011
Location: Walled lake michigan
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Man i want a edit button. 3 inch dp is what i ment. Im always on this smartphone.
Do you or anyone have a link to bluetooth obdii. I have torque app .just need to get bt.
Do you or anyone have a link to bluetooth obdii. I have torque app .just need to get bt.
#27
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
So, no cat. Your O2 sensor is working fine.
This is the adapter I have. Flat out one of the best. I tried one of the cheep Chinese, and it didn't work well at all.
http://cgi.ebay.com/ebaymotors/PLX-K...item27bd46f78e
This is the adapter I have. Flat out one of the best. I tried one of the cheep Chinese, and it didn't work well at all.
http://cgi.ebay.com/ebaymotors/PLX-K...item27bd46f78e
#29
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
And more. A aeroforce will give you 2 scans. Torque can do 6 on each screen. I believe the KR is now working on torque. Only thing the aeroforce does that torque wont is a CASE learn.
#30
DINOSAURUS BOOSTUS
Expert Gearhead
Yeah Torque is supposedly working good for KR now.
A high flow on any 00+ is going to set codes. GM wrenched down on the expected efficiency of the cat.
When I program for this, I ensure the low efficiency and all voltage/heater codes are taken care of as well.
A high flow on any 00+ is going to set codes. GM wrenched down on the expected efficiency of the cat.
When I program for this, I ensure the low efficiency and all voltage/heater codes are taken care of as well.