CTS springs on 92 se
I have heard and seen speculation of CTS springs to fit some of our cars, I know my year is not in this, so as the alway try it kinda guy I have some on way to me getting installed thurs. I work at a dealer ship and have chat with the tech on this, they are kinda excited to see this, I have measure cts factory and mine,Looks close........... :D Also installing new shocks/struts in process PSS These are lowering springs Eibac or how ever you spell it.
|
What are springs going to do for you on an L27?
You have a cam? Higher ratio rockers? If not, don't waste your breath. What's the spring rate? Open load? Closed load? Bind height? I could care less what they're FROM. It's a spring. 1. What's it going to do for you? 2. What are the SPRING specs? I've been through this. I don't have stock springs. But it took me a long time to get to that point. |
Um, suspension, Bill. :lol:
|
Thanks for the clarification.
My questions stand even with that. |
Rats GMPD s still down...
federal-mogul site does not have the CTS on there... Advance auto only has a Lowering kit for them |
Originally Posted by willwren
Thanks for the clarification.
My questions stand even with that. 1) I need new shocks/struts 171000 on orginals pretty sure :shock: 2) I am a fan of lowering cars a bit, and my wheels fit very nice, but need a 1 in gap to be closed more.. No gains to me other then better ride for the new shocks/struts.. |
What is the individual coil diameter, 'free' length, and compressed length of the springs? What is their load rating and overall diameter?
|
Originally Posted by willwren
What is the individual coil diameter, 'free' length, and compressed length of the springs? What is their load rating and overall diameter?
|
Just incase you didn't know Coil Spring Specialties can make custom springs for you.
It's about $150/pair for a 2" drop uncoated but I would definitely suggest getting them coated. Paulnold and I went through them. If the CTS route dosen't work out you can always go that route. |
Originally Posted by 95naSTA
Just incase you didn't know Coil Spring Specialties can make custom springs for you.
It's about $150/pair for a 2" drop uncoated but I would definitely suggest getting them coated. Paulnold and I went through them. If the CTS route dosen't work out you can always go that route. |
All times are GMT -4. The time now is 01:04 PM. |
© 2024 MH Sub I, LLC dba Internet Brands