wiring harness, pulley and tune question
02-13-2009, 02:20 PM
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Feb 2009
Location: IL
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
wiring harness, pulley and tune question
I have a 1999 Pontiac Bonneville SLE and want to but a series III supercharger crate engine in my car. will i need to add any wire harness and change the computer around at all. And what is the smallest pulley i can put on the engine with out any motor work.
02-13-2009, 02:38 PM
#2
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
you will need it add a few wires to your Harness
you will also need a set of the Series 2 fuel rails, injectors TB adapter and a L67 or more favorbably a N* throttlebody.
you can MAYBE run a 3.6 pulley with a decent tune
you will also need a set of the Series 2 fuel rails, injectors TB adapter and a L67 or more favorbably a N* throttlebody.
you can MAYBE run a 3.6 pulley with a decent tune
02-13-2009, 02:45 PM
#3
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
I would suggest no small then that pulley. You will need to scan for KR. If you want to go smaller you will need to look at 1.9:1 rockers or better yet, a cam.
Thread
Thread Starter
Forum
Replies
Last Post
ssnhrn
Everything Electrical & Electronic
2
04-28-2010 11:30 AM
Punkrulz
Audio (and aftermarket electronics)
4
05-10-2004 12:11 AM
mikeblue94
Audio (and aftermarket electronics)
7
03-30-2004 09:13 AM