Is it hard to remove the upper intake plenum ?
09-27-2005, 10:38 PM
#4
Senior Member
True Car Nut
Join Date: Feb 2003
Location: Philly
Posts: 4,508
Likes: 0
Received 0 Likes
on
0 Posts
The HVII is pretty easy to install.
I have the install instructions from when I installed mine. I could e-mail them to you....
But I should warn you that the HVII is one of the last n/a mods you should do. A non-cammed car will really not benifit from it in the 1/4. The HVII reduces low end torque but keeps the torque curve up longer to compliment a higher power band. This higher powerband will only really come as a result of a cam. So, without a cam, you might keep the torque curve up for a little bit longer but it won't be a good trade off with the low end torque you will loose.
I have the install instructions from when I installed mine. I could e-mail them to you....
But I should warn you that the HVII is one of the last n/a mods you should do. A non-cammed car will really not benifit from it in the 1/4. The HVII reduces low end torque but keeps the torque curve up longer to compliment a higher power band. This higher powerband will only really come as a result of a cam. So, without a cam, you might keep the torque curve up for a little bit longer but it won't be a good trade off with the low end torque you will loose.
09-28-2005, 08:28 AM
#8
Senior Member
True Car Nut
Join Date: Feb 2003
Location: Philly
Posts: 4,508
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by willwren
Maybe we should ask ComfyCar where he'* at, considering they're posting from the same IP address. 
Thanks for making me laugh so early in the morning bill.
09-28-2005, 10:25 AM
#10
Senior Member
True Car Nut
Join Date: Jun 2004
Location: Rochester, NY (college)
Posts: 6,182
Likes: 0
Received 0 Likes
on
0 Posts
the reason I ask is because there could be a memember around that has either done the intake manifold and/or a cam swap before. It would jsut making installing that stuff so much easier.