CAI??
#2
Senior Member
True Car Nut
Join Date: May 2002
Location: Edmonton, AB Canada
Posts: 2,621
Likes: 0
Received 0 Likes
on
0 Posts
Re: CAI??
Originally Posted by Short
What kind of cold air intake do you recommend?
#4
Senior Member
Posts like a Northstar
Join Date: Dec 2002
Location: Western, Mass
Posts: 587
Likes: 0
Received 0 Likes
on
0 Posts
Short, i recomend the ADTR intake if you can fit it. It'* at has a topic on the top of the page. Read my first post and it pretty much describes it.
#5
Senior Member
Certified Car Nut
Join Date: Oct 2002
Posts: 11,308
Likes: 0
Received 0 Likes
on
0 Posts
Anyone that makes/ or can make some kind of heat shield/box for the ADTR intake? I know it depends on each car they are different. Just wondering, and also is there a good looking and effective way to make one myself for my intake?
#6
Senior Member
True Car Nut
Originally Posted by bonnie94sse
Anyone that makes/ or can make some kind of heat shield/box for the ADTR intake? I know it depends on each car they are different. Just wondering, and also is there a good looking and effective way to make one myself for my intake?
on a side note.. would heat shield tape work backwards?? As in if I plaster it on the inside of the airbox to attempt to keep the heat out but not ruinin the stock look? ( the cops around here are really raisin hell and giving tickets for stupid crap around here.. and if I can keep the stock airbox look.. I can just say the old accordian tubing broke so I replaced it with a metal pipe )
#7
Senior Member
Certified GM nut
Join Date: Jul 2003
Location: Chicagoland
Posts: 1,712
Likes: 0
Received 0 Likes
on
0 Posts
Just got my Thrasher CAI for my 01 ssei today. Looks pretty nice, I know I'll have to do some minor cutting to make it fit, but that'* of I've got a dremel tool. I like the fact that its a true CAI kit not like my last car with an open cone kit from RSM racing.
While I'm on the topic, DeathRat, I know an RSM intake when I see one, I'll just leave it at that. Don't mean to offend or anything.
Heat shield, there not too hard to make, you just need to be creative.
Here'* one I made for my Aurora, fit pretty darn good, fit snug against the headliner too.
more pictures here
http://www.cardomain.com/member_page...=214083&page=4
While I'm on the topic, DeathRat, I know an RSM intake when I see one, I'll just leave it at that. Don't mean to offend or anything.
Heat shield, there not too hard to make, you just need to be creative.
Here'* one I made for my Aurora, fit pretty darn good, fit snug against the headliner too.
more pictures here
http://www.cardomain.com/member_page...=214083&page=4
#8
Senior Member
True Car Nut
Join Date: May 2003
Location: Holt, MI & Lima, OH
Posts: 3,022
Likes: 0
Received 0 Likes
on
0 Posts
I don't remember for sure, but doesn't the SLP Airbox fit right in without any modifications at all? If this is the case, it may be a good airbox to consider also.
#10
Senior Member
Certified GM nut
Join Date: Jul 2003
Location: Chicagoland
Posts: 1,712
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the compliments bonnie94sse,
I have to give esome credit to my father on making that heat shield, I make a cardboard mock up and a template, me makes it from sheet metal, what A guy. Our new project is getting Thrashers CAI kit to fit in my 01 ssei. Top priorty off the weekend.
I have to give esome credit to my father on making that heat shield, I make a cardboard mock up and a template, me makes it from sheet metal, what A guy. Our new project is getting Thrashers CAI kit to fit in my 01 ssei. Top priorty off the weekend.
Thread
Thread Starter
Forum
Replies
Last Post
streetracer
Performance, Brainstorming & Tuning
8
08-26-2002 05:25 PM
CDecker
Performance, Brainstorming & Tuning
1
08-02-2002 03:09 PM