Intake help!
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Sep 2009
Location: WICHITA, KANSAS
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Intake help!
ok i wanna put a k&n intake system instead of stock? what is the easyest way to do that?
can i jus take that box out and on the stock intake hose put a k&n air filter on there will that work???
can i jus take that box out and on the stock intake hose put a k&n air filter on there will that work???
#3
Administratus Emeritus
Certified Car Nut
I think he'* just talking about buying a cone.
Unless you use a tube to get to colder air, for a n/a system you will do better to just put the drop in filter in the box you have. There is alot of photos here showing various cold air intakes. Your also going to have to bolt down the PCM. I think the best way around this is to buy a system from ZZP or Intense. It'* an item that design isnt critical for your application, so I would go for the cheapest.
Unless you use a tube to get to colder air, for a n/a system you will do better to just put the drop in filter in the box you have. There is alot of photos here showing various cold air intakes. Your also going to have to bolt down the PCM. I think the best way around this is to buy a system from ZZP or Intense. It'* an item that design isnt critical for your application, so I would go for the cheapest.
#4
Senior Member
Posts like a Corvette
Join Date: Jun 2008
Location: Cleveland, OH
Posts: 1,389
Likes: 0
Received 0 Likes
on
0 Posts
I have one that will work for an N/A car, filter, tube, and a gutted box
https://www.gmforum.com/t283396/
https://www.gmforum.com/t283396/
Thread
Thread Starter
Forum
Replies
Last Post
markviiisvt4
Performance, Brainstorming & Tuning
10
01-03-2006 11:46 AM