Hood Vent install pics (half done) 56k make a sandwich
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Hood Vent install pics (half done) 56k make a sandwich
Action shot. Using a Dremel with a large diameter cutter (larger than the typical
cutoff wheel, uses a spacer to fit a standard arbor):
Not posed. Just ended up this way, and I don't turn down free beer so don't
knock the Miller Lite:
Getting the template right requires marking and cutting from top and bottom:
First rough cut in:
Second cutout coming out:
This morning after cleanup and priming:
View while driving (vents are not fully seated/tightened yet, nor is the screen installed).
Two more vents to fit and install, then the hood can be wetsanded and primed.
cutoff wheel, uses a spacer to fit a standard arbor):
Not posed. Just ended up this way, and I don't turn down free beer so don't
knock the Miller Lite:
Getting the template right requires marking and cutting from top and bottom:
First rough cut in:
Second cutout coming out:
This morning after cleanup and priming:
View while driving (vents are not fully seated/tightened yet, nor is the screen installed).
Two more vents to fit and install, then the hood can be wetsanded and primed.
#3
Guest
Posts: n/a
Infreakingcredible
Awsome.... I can't wait to see them in green
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Awsome.... I can't wait to see them in green
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#9
Guest
Posts: n/a
Painted to Match
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote