got my ER rockers
#1
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Oct 2006
Location: montreal canada NEBF07 ONBF07
Posts: 987
Likes: 0
Received 0 Likes
on
0 Posts
got my ER rockers
yeah there here almost new ER rockers should install them after my vacation in august I don't know the torque rating of these and should i use lock tight
#2
Senior Member
Posts like a Turbo
Join Date: Jul 2006
Location: Toronto
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
Awesome!
Been thinking of doing that myself too. If I really wanna make this car of mine pull hard, these need to happen.
Been thinking of heading out to Montreal sometime before the snow flies again. Will have to have you take me for a ride when these are done.
E
Been thinking of doing that myself too. If I really wanna make this car of mine pull hard, these need to happen.
Been thinking of heading out to Montreal sometime before the snow flies again. Will have to have you take me for a ride when these are done.
E
#3
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Oct 2006
Location: montreal canada NEBF07 ONBF07
Posts: 987
Likes: 0
Received 0 Likes
on
0 Posts
Been thinking of heading out to Montreal sometime
#4
Senior Member
Posts like a Corvette
Join Date: Jan 2007
Location: San Diego, CA
Posts: 1,451
Likes: 0
Received 0 Likes
on
0 Posts
Did you get re-useable rocker bolts? Those would be 25 ft lb torque (or whatever that translates to in Canadian )
If you're going to use new GM torque-to-yield bolts, I'd have to look it up (it'* probably in Techinfo)
I used blue threadlocker on mine.
If you're going to use new GM torque-to-yield bolts, I'd have to look it up (it'* probably in Techinfo)
I used blue threadlocker on mine.
#5
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Oct 2006
Location: montreal canada NEBF07 ONBF07
Posts: 987
Likes: 0
Received 0 Likes
on
0 Posts
yes im getting new re-usable bolts .tj will get them for me on the same order for his cam .and thank you for the torque spec (is the same in canadien)
#8
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Oct 2006
Location: montreal canada NEBF07 ONBF07
Posts: 987
Likes: 0
Received 0 Likes
on
0 Posts
agrazela Posted: Fri Jul 20, 2007 12:54 pm Post subject:
--------------------------------------------------------------------------------
Are you considering upgraded springs?
--------------------------------------------------------------------------------
Are you considering upgraded springs?
not this summer my car as low mileage and i think it should be ok for now but i have an eye on a set heads or this winter port polish valve job new seals and springs if ifeel they are needed
#9
Senior Member
Certified GM nut
Join Date: Dec 2002
Location: plattsburgh NY
Posts: 2,037
Likes: 0
Received 0 Likes
on
0 Posts
They dont have many miles on them at all. I drove the car to the track once, and a few times to college over the winter (when my gf didnt have to go, we usually just take her car since it gets much better gas milage). And that is about it. Once the snow was off the ground i took the car out and did brakes and boom no more tranny.