MAP=LOW???????????
#1
Member
Posts like a V-Tak
Thread Starter
MAP=LOW???????????
keep getting a obd1 code map=low i have replaced the map sensor 2 x back to back now. Whats causing this problem car is a 1988 olds cutlass supreme FWD 2.8 engine
#3
Member
Posts like a V-Tak
Thread Starter
was code =34 that code says- map low! ?? which means high vacumn? remember -i had same code from old map sensor that did check as leaking on a vacumn pump test!
Last edited by Twinpilot; 11-29-2014 at 12:09 PM.
#4
Senior Member
True Car Nut
Essentially, the code sets when the computer is reading the voltage too low. If you have verified the sensor is reading correctly, you will want to check the supply voltage to verify it is what it should be, and you will need to check wiring as well.
Thread
Thread Starter
Forum
Replies
Last Post
BlownBuick
Forced Induction
13
05-09-2006 05:03 PM
SSsuperchargedEi
Your Other Rides: Pics & Videos
10
10-11-2004 10:13 AM