I replaced Cam Sensor and still no fix. (Code 42)
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2010
Location: Clovis NM
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
I replaced Cam Sensor and still no fix. (Code 42)
Well I have had the code 42 for a while now and I decided to replace the Cam Sensor.
That did not fix my problem. Whats the next step do you guys think I should do?
The check engine light turns on randomly and some times the car will just shut off while driving. When it does that my cruise control doesn't turn back on for a bit.
It do the famous Cranking but does not turn over.
So any ideas?
That did not fix my problem. Whats the next step do you guys think I should do?
The check engine light turns on randomly and some times the car will just shut off while driving. When it does that my cruise control doesn't turn back on for a bit.
It do the famous Cranking but does not turn over.
So any ideas?
#3
Senior Member
True Car Nut
code 42 is also related to the icm.Start your car and heat the icm up with a heat gun or hair dryer and see if after it warms up it dies if so your icm is bad.Also check out all your wiring between the icm and cam sensor
#4
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2010
Location: Clovis NM
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
#5
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2010
Location: Clovis NM
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the info! Ill have to give that a try.
#6
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2010
Location: Clovis NM
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Do you guys think if I were to replace my crank sensor that it will fix my problems?
Could it possibly be my ECU going bad? Maybe getting hot and not sending spark?
Could it possibly be my ECU going bad? Maybe getting hot and not sending spark?
Thread
Thread Starter
Forum
Replies
Last Post
douglas
1992-1999
4
12-11-2010 01:44 AM
Bonneville92V688
1992-1999
14
02-17-2008 12:53 AM
Sprig
Everything Electrical & Electronic
3
06-17-2006 10:13 AM