Hi RJolly87,

Well, at least you are confirming what I'm reading for me so thanks. Next course of action is call Innova and ask about a firmware upgrade since I can't return the scanner... Hopefully that'll pay off.
Thanks for the heads up on alarm function. I wasn't sure which systems it killed if any. And yah, I'll be using my test light on all the fuses in the box shortly to double check them.
As to a new thread, I almost did that in another section but saw that cross posting is frowned upon so just went with it here.

Greg
88 Fiero w/95 3800 SC

under the dash is your OBD1.5 the top row goes in order of 1 2 3 etc so use a pin out to connect pin 3 & 4 together with the ignition on and the check engine light will flash a two digit(OBD1)code

@tdewitt34 grounding the 3-4 pins in the 1.5 16 pin connector doesn't work. Oh, if I didn't say it below, I called the Innova folks and they said that their reader would not read that change over year one off and they did not have a firmware upgrade. Go figure.

Greg
88 Fiero 3.8 */C

Actron 9185 will read OBD1.5