Greetings;
The car hos got a code,and it be a P0341? Lookup say its a cam postion sensor,same code on the last belly up engine that was in this car

When the engine was replaced, was the original wiring harness reused? If so, it'* possible there'* a problem with the wire harness.

Sure,I'll check with the swapper,I'll let you know;
Thanks

Thanks all:
0341 is a ground problem with the ignition module....a cheap fix is to remove the ignition module,clean the surface of the trans and back of module,replace bolts and plug wires along with .040 gap plugs.clear code.. if light comes back on,replacement of ignition module is needed...
Hope this helps,
Ernie