TPS question
#1
Junior Member
Thread Starter
Join Date: Apr 2013
Location: Memphis TN
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
TPS question
Quick question here, I have a 90 Olds Delta 88 and last week I found that there was a bad oil leak at the front left corner where manifold mets the block. I pulled the manifold and replaced the intake manifold gasket and reassembled everything. All went back together just fine but when I started it back up it was idling rough. Hooked up the scanner, SnapOn MT2500, and it showed code 22 TPS low voltage?. Is the TPS going bad a common problem or did I somehow mess it up? The car was running fine before I did the work, but over the last few months the mileage has been getting worse.
Thanks
Greg G
Thanks
Greg G
#2
Senior Member
True Car Nut
This link will take you to a write up that explains how to test the TPS:
https://www.gmforum.com/trouble-shoo...sensor-279319/
https://www.gmforum.com/trouble-shoo...sensor-279319/
#3
Junior Member
Thread Starter
Join Date: Apr 2013
Location: Memphis TN
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
I cant remember the exact value right now but by scanner was giving a live reading at idle and it also told the acceptable range, and mine was WAY off of acceptable. I will do this test tonight and most likely make a trip to the parts store tomorrow.
Thx
Greg G
Thx
Greg G
Thread
Thread Starter
Forum
Replies
Last Post
gtpsuprchrgd03
1992-1999
2
09-09-2008 10:47 AM