If your into engine theory stuff (plus m62 stuff)
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Feb 2003
Location: Philly
Posts: 4,508
Likes: 0
Received 0 Likes
on
0 Posts
If your into engine theory stuff (plus m62 stuff)
Check out these links:
http://www.theoldone.com/archive/
and
http://www.theoldone.com/articles/
Lots of interesting reading. It'* mainly relating to hondas but still cool none the less.
This guy (Larry Widmer) also increases the efficiency of the m62.
"Endyn takes an Eaton M-62 supercharger, rips out the guts and replaces and reworks everything with an eye to increasing flow and reducing the temperature of the intake charge. Carbon fiber rotors (80 percent lighter than the stock pieces) are installed with zero clearance between the rotor and case. The exit side is smoothed and aluminum half-rounds are welded in place to increase the flow. The mods result in an increase from the stock 12 psi to an incredible 27 psi!"
from:
http://www.hotrod.com/featuredvehicl...onda_civic_si/
Says they do some modifications as a service at the bottom of this page:
http://www.theoldone.com/components/...er_systems.htm
http://www.theoldone.com/archive/
and
http://www.theoldone.com/articles/
Lots of interesting reading. It'* mainly relating to hondas but still cool none the less.
This guy (Larry Widmer) also increases the efficiency of the m62.
"Endyn takes an Eaton M-62 supercharger, rips out the guts and replaces and reworks everything with an eye to increasing flow and reducing the temperature of the intake charge. Carbon fiber rotors (80 percent lighter than the stock pieces) are installed with zero clearance between the rotor and case. The exit side is smoothed and aluminum half-rounds are welded in place to increase the flow. The mods result in an increase from the stock 12 psi to an incredible 27 psi!"
from:
http://www.hotrod.com/featuredvehicl...onda_civic_si/
Says they do some modifications as a service at the bottom of this page:
http://www.theoldone.com/components/...er_systems.htm
Thread
Thread Starter
Forum
Replies
Last Post
94SSEgold
1987-1991
3
08-24-2003 09:21 PM