Out of control
12-23-2010, 11:55 AM
#1
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Feb 2009
Location: Jersey Shore
Posts: 1,511
Likes: 0
Received 0 Likes
on
0 Posts
Out of control
This is from another forum I'm on. I got to say this article left my speechless.
http://forums.bimmerforums.com/forum/sho...?t=1575817
http://forums.bimmerforums.com/forum/sho...?t=1575817
12-23-2010, 12:27 PM
#5
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Feb 2009
Location: Jersey Shore
Posts: 1,511
Likes: 0
Received 0 Likes
on
0 Posts
12-23-2010, 01:24 PM
#9
Senior Member
Posts like a Corvette
Join Date: Aug 2010
Posts: 1,337
Likes: 0
Received 0 Likes
on
0 Posts
Imagine....
1000WHP Per liter
hahahahahahahahaha
your 3.8 would be 3800WHP
My Dmax 6.6 Would be
6600 WHP
But would likely have to Stop and rebuild it by the time you hit the end of the driveway !!!
1000WHP Per liter
hahahahahahahahaha
your 3.8 would be 3800WHP
My Dmax 6.6 Would be
6600 WHP
But would likely have to Stop and rebuild it by the time you hit the end of the driveway !!!
12-24-2010, 12:09 AM
#10
Senior Member
Certified GM nut
I am floored (pun not intended) at the power output, but if I understand this quote correctly:
…you need to replace the expensive connecting rods after 120 hours of driving time? Thanks but no thanks.
I wouldn't mind renting it for the weekend, though.
They also use straight metal matrix composite (mmc) rods, which are lighter than Ti. The problem is cost and life (120 hours). These use no rod bearing.
I wouldn't mind renting it for the weekend, though.
