safe work practices
 

As you all know, Bonneville Forum is the place to go for help with fixing and modding your Bonnevilles. In providing our members with technical advice we are always concerned that you use safe work practices at all times while working on your vehicle.

With this in mind, I wanted to address three key elements of working on your car where safe practics are critical; lifting your car so you can work underneath it, proper work place lighting, and which after market products are appropriate for your vehicle.


The first rule of safe lifting is to always use oak, never pine.










https://www.gmforum.com/attachment.p...6&d=1256174065



The second rule of safe lifting is to always ensure the vehicle is properly blocked before starting work underneath the car.













https://www.gmforum.com/attachment.p...7&d=1256174076



Now that you have a good understanding of safe lifting practices, the next area of concern is proper work place lighting. Recognizing that not everyone has a garage to work in, if you are working in your driveway or in the street in front of your house, it is perfectly acceptable to use local municipal lights sources. However, you should always ensure the local municipal light source has fresh bulbs of the correct wattage.
















https://www.gmforum.com/attachment.p...8&d=1256174095



Now that we have covered some of the aspects of safe work practices, another area of safety concern is to ensure any parts you install on your car will not affect safe operation of your vehicle. Of particular concern are the after market products you add to enhance your enjoyment of your vehicle. The main concern here is to make absolute certain these products are secured to your vehicle in a robust manner.

















https://www.gmforum.com/attachment.p...9&d=1256174116








Feel free to share your ideas on safe work practices.

sad thing is i have seen all but the last pic done in person beware stupid people are breeding

NICE!!! I'm GXP Venom,Forum Admins and I approve this Safety Maessage. ROFL!!!

....and don't forget to wear your safety glasses!

You are right. I forgot about safety glasses. An absolute requirement when working under you car. The key to selecting proper safety glasses is to ensure they have adequate coverage.









https://www.gmforum.com/attachment.p...1&d=1256178943

These do not meet ANSI or OSHA standards. They are not equipped with the side shields and the glasses brow brim does not come in under the brow. :D

https://www.gmforum.com/attachments/...ge-glasses.jpg


Where's RICO????

Maybe so, but I am in Canada and am not subject to US standards.

Never over reach.

http://www.funnyphotos.net.au/userim...1149744710.jpg