Lounge For casual talk about things unrelated to General Motors. In other words, off-topic stuff. And anything else that does not fit Section Description.

squeaky floor

Old 07-26-2006, 10:50 PM
  #1  
Junior Member
Thread Starter
 
Custom88's Avatar
 
Join Date: Aug 2002
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Custom88 is on a distinguished road
Default squeaky floor

ok, I'll admit I'm pretty frustrated with this, but just wanted to see if anyone had any ideas that do work on homes and are handy. at our Condo there is a god aweful squeak/cracking noise that is in the floor RIGHT in front of the door just as you walk in. I went online and found some braces that are made to screw into the floor joist, and then into the subfloor. They say they're guaranteed to work.. I screwed THREE of these braces on the floor where the floor squeaks horribly and the squeak is STILL there! You can clearly see a gap about 2' long where the noise is coming from.. I even placed wood glue between the subfloor and the joist, and the noise just wont' go away. I cannot figure it out and I"m getting very frustrated. Before placing the brackets there, I see that someone else tried fixing the problem by shoving 8 wooden shims between the subfloor and the joist.. that obviously didn't fix the problem either! The only way I can get the noise to go away is to stand on the floor and press up on the floor joist as hard as I can, while someone walks across it. WHen I do this, the floor does NOT make any noise at all... I obviously cannot stand there all day pushing up on the floor joist. any ideas? It'* VERY annoying and makes a nice condo seem very cheap when the floor makes so much noise right as you walk in.. HELP!
Old 07-26-2006, 10:55 PM
  #2  
Senior Member
True Car Nut
 
corvettecrazy's Avatar
 
Join Date: Jun 2004
Location: Rochester, NY (college)
Posts: 6,182
Likes: 0
Received 0 Likes on 0 Posts
corvettecrazy is on a distinguished road
Default

get a tranny jack and jack up the floor joist?

Or while you hold up the joist have someone else pound shims into where it rests so that when you let go it sits higher.
Old 07-26-2006, 11:01 PM
  #3  
Senior Member
Certified Car Nut
 
Gumball's Avatar
 
Join Date: Apr 2004
Location: Quincy, Ma
Posts: 15,342
Likes: 0
Received 0 Likes on 0 Posts
Gumball is on a distinguished road
Default

Baby powder. no joke.
But....
If the screws/braces did catch the joist the problem should have gone away.
try to tighten them again.

did anybody drill and screw right through the loose floor boards, to the joist?
when doing so .counter sink and then fill in with wood fill.

but go ahead and try the baby powder thing, be generious,and let us know what happened.
Old 07-26-2006, 11:09 PM
  #4  
Senior Member
True Car Nut
 
BLACK94SSEi's Avatar
 
Join Date: Feb 2006
Location: Melrose
Posts: 4,596
Likes: 0
Received 0 Likes on 0 Posts
BLACK94SSEi is on a distinguished road
Default

Originally Posted by Gumball
Baby powder. no joke.
But....
If the screws/braces did catch the joist the problem should have gone away.
try to tighten them again.

did anybody drill and screw right through the loose floor boards, to the joist?
when doing so .counter sink and then fill in with wood fill.

but go ahead and try the baby powder thing, be generious,and let us know what happened.
We got Jim Bob Villa in the house!!! :

I remember you told me you knew your sht
Old 07-26-2006, 11:19 PM
  #5  
Senior Member
Certified Car Nut
 
dbeast420's Avatar
 
Join Date: Aug 2004
Location: My reclining computer chair
Posts: 11,269
Likes: 0
Received 0 Likes on 0 Posts
dbeast420 is on a distinguished road
Default

Renting or buying???

Call the landlord if renting...........
Old 07-26-2006, 11:24 PM
  #6  
Junior Member
Thread Starter
 
Custom88's Avatar
 
Join Date: Aug 2002
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Custom88 is on a distinguished road
Default

this is what I'm dealing with BTW.



In the video below I was pushing up on the floor joist somewhat hard in order to simulate what it'* like when someone'* walking over the floor. You can see the three braces I installed, and the wood glue in it if you look close enough .
Old 07-26-2006, 11:26 PM
  #7  
Junior Member
Thread Starter
 
Custom88's Avatar
 
Join Date: Aug 2002
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Custom88 is on a distinguished road
Default

we are currently renting, but will be buying within the year. It'* a 1900 square foot condo for $74,000. All oak cabinets, all appliances, ceramic tiles throughout, two bath, and two bedroom. It'* spread across three different stories.
Old 07-26-2006, 11:30 PM
  #8  
Senior Member
Certified Car Nut
 
Gumball's Avatar
 
Join Date: Apr 2004
Location: Quincy, Ma
Posts: 15,342
Likes: 0
Received 0 Likes on 0 Posts
Gumball is on a distinguished road
Default

More wedges... stuff em in there.


I still didnt hear the baby powder outcome yet.....
Old 07-26-2006, 11:33 PM
  #9  
Junior Member
Thread Starter
 
Custom88's Avatar
 
Join Date: Aug 2002
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Custom88 is on a distinguished road
Default

Originally Posted by Gumball
More wedges... stuff em in there.


I still didnt hear the baby powder outcome yet.....
I don't stock baby powder at my home. I'll have to get back to you with that one. The problem I'm having is that I think the squeak itself is coming from below the wall area itself and I can't get someone'* weight to bring the risen floor down enough to screw the brace onto it. The floor also has several cracks in the wood in this area where it'* making all the noise. It'd be so much easier to fix this from above the floor, but that'* not possible with the ceramic tiles. :(
Old 07-26-2006, 11:35 PM
  #10  
Senior Member
True Car Nut
 
corvettecrazy's Avatar
 
Join Date: Jun 2004
Location: Rochester, NY (college)
Posts: 6,182
Likes: 0
Received 0 Likes on 0 Posts
corvettecrazy is on a distinguished road
Default

if you are renting why not have the landlord or similar fix it?

Quick Reply: squeaky floor



All times are GMT -4. The time now is 12:29 AM.