Grand Am Cylinder 3 Misfire Code
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Aug 2005
Location: Westerville, OH
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Grand Am Cylinder 3 Misfire Code
Cylinder 3 misfire
I am having a cylinder 3 misfire code. Cylinder three plug is the middle back plug if I am not mistaken. I check the connections and everything is good. Pulled the wire off at the coil pack and it is clean and good to go. ran up and down the wire to check for burns. holes rips etc and nothing was wrong there. I pulled the plug out, it looked fine, but I still replaced it. Re-attached it. Let the battery unplugged for 1.5 hours, plugged the connection back in, started the car and the issue still remains. I don't think it is the coil. The car has 35,000 miles and the UIM gasket was replaced at 32,000 miles so I don't think it is that.
Any ideas?
Maybe the injector went bad? I am running Lucas gas treatment in it right now.
I am having a cylinder 3 misfire code. Cylinder three plug is the middle back plug if I am not mistaken. I check the connections and everything is good. Pulled the wire off at the coil pack and it is clean and good to go. ran up and down the wire to check for burns. holes rips etc and nothing was wrong there. I pulled the plug out, it looked fine, but I still replaced it. Re-attached it. Let the battery unplugged for 1.5 hours, plugged the connection back in, started the car and the issue still remains. I don't think it is the coil. The car has 35,000 miles and the UIM gasket was replaced at 32,000 miles so I don't think it is that.
Any ideas?
Maybe the injector went bad? I am running Lucas gas treatment in it right now.
#3
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Aug 2005
Location: Westerville, OH
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Isn't that somewhat in the low mile range for that to be the problem? I have some TrailBlazer injectors with more Lb per hour flow. Should I try that?
#4
Senior Member
True Car Nut
Join Date: Nov 2005
Location: Elberton, GA
Posts: 5,242
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Adam
Isn't that somewhat in the low mile range for that to be the problem? I have some TrailBlazer injectors with more Lb per hour flow. Should I try that?
BTW, mine croaked at like 20k
Thread
Thread Starter
Forum
Replies
Last Post